Beem DigiFry Bedienungsanleitung Seite 32

29
4. Switch on the device by pressing Field
display (5) (Fig. A). The pre-set temperature and duration of the Manual programme
are displayed alternately in the LED display.
5. Using the Programme fi eld
remain in the pre-set Manual programme (see the "Operation" chapter | "Operating
Elements and Functions").
6. If necessary you can adjust the temperature and the duration individually using
the relevant + and – fi elds (see the "Operation" chapter | "Operating Elements and
Functions").
You can also adjust the temperature and the duration during the cooking process.
7. Start the cooking process by pressing Field
appear in the display in order to indicate that the device is heating up.
Please note: The
function. To maintain a constant temperature, the device heats up or the device stops
the heating process at regular intervals. When Symbol
a heating phrase, and when Symbol
interrupted.
8. When the set time has elapsed, 5 beeps are heard and the supply of heat is automati-
cally stopped. The heating symbol in the display goes off.
By touching Field
manually at any time.
Please note: After the set time has elapsed or the device is switched off manually,
the fan initially continues to operate!
remaining operating time remain visible in the display. After approximately 20 seconds
the fan and accordingly the device switch off completely. All elements go off, except
for Symbol
9. Carefully and evenly remove the drawer with the basket insert (4) from the device using
the handle of the basket insert, and place the drawer on a heat-resistant, non-slip
surface.
10. Remove the basket insert from the drawer by pushing the cover forward and pressing
the release button on the handle of the basket insert (Fig. B1 and B2). Pull the basket
insert up out of the drawer.
11. Carefully remove the food from the basket insert.
12. Pull the mains plug out of the socket and allow the device to cool down completely.
13. Clean the device after each use (see the "Cleaning and Care" chapter). Do not allow
any food residues to dry on the device.
01359_DE-EN-FR-ES-IT_A5_V2.indb 29 01359_DE-EN-FR-ES-IT_A5_V2.indb 29
(17) you can select a specifi c programme or you can
symbol goes on and off at regular
during the cooking process the process can be interrupted
Symbol
.
(15). The operating elements appear in the
. Symbol (10) and Symbol
intervals. This is not a mal-
appears the device is in
goes off the supply of heat has been briefl y
as well as the temperature and any
EN
(22)
14.05.2018 14:07:39 14.05.2018 14:07:39