Beem DigiFry Bedienungsanleitung Seite 30

27
For each programme the temperature and the duration can be set individually (see the
•
"Operating Elements and Functions" section).
• Depending on the selected programme the relevant system appears in the display (5).
If no programme symbol appears in the display, the Manual programme has been set.
Operating Elements and Functions
The device has the following operating elements and functions:
Operating elements
Fields + and – for timer
Fields + and – for temperature
Programme fi eld
The required duration and temperature can be set by touching the relevant + and
•
– fi elds. If the fi elds are pressed for an extended period the fast increment mode is
activated.
Pressing Field
•
process and switches off the device (On > Start > Off ).
• The required programme can be selected by pressing Field
is switched on the Manual programme is pre-set. The programmes can be selected in
the following order:
Tips
• This device works with hot air. In general, you can prepare all dishes that can also be
prepared in a conventional fan oven. It is suitable, among other things, for hot-air grill-
ing of chips and potato wedges made from fresh potatoes, for cooking frozen chips
and other frozen convenience products, and for cooking all kinds of chopped up food
(both fresh vegetables and fresh meat and fresh fi sh).
• Generally it is not necessary to preheat the device. However, to be better able to de-
termine when the food is cooked and when preparing food which has to be "cooked
to perfection", preheating to the required temperature is recommended (see the "Using
the Device and Preparing Food" chapter). The set temperature has been reached
when Symbol
01359_DE-EN-FR-ES-IT_A5_V2.indb 27 01359_DE-EN-FR-ES-IT_A5_V2.indb 27
Field
(15) several times switches on the device, starts the cooking
Chips> Meat> Prawns> Cake> Chicken> Steak >
Fish > Manual
(22) on the display goes off.
Functions
Heating duration (1 – 30 minutes in
1-minute steps)
Temperature (80 – 200 °C in 5-degree
steps)
Switching the device on and off
Starting the heating process
Programme selection
(17). When the device
EN
14.05.2018 14:07:39 14.05.2018 14:07:39