LD Systems WIN42HUB Bedienungsanleitung Seite 17

DRIVER INSTALLATION:
Now the COM port number of the "USB serial port" will be displayed in Device Manager.
Note: The COM port number of the "USB serial port" must be between 1 and 16.
Now, using the included RJ45 cable, connect the WIN42 CONTROLLER HUB to the USB to RS485 converter and start the WIN42
CONTROL CENTER SOFTWARE. Now select the command "Communication" in the "Tools" menu to see whether the port number
of the USB serial port and the port number in the WIN42 CONTROL CENTER match (COM16 in our example).
17