Product Description - CO/Tech NTY20-16L Original Bedienungsanleitung

• Do not use any kind of extension lead with the fan heater.
• Only use the fan heater in a well-ventilated area.
• Never insert foreign objects into the inlet or outlet of the fan heater.
• Allow ample space around the heater; at least 1 m in front of the air inlet and outlet.
• Never place the fan heater on soft surfaces such as beds, blankets, thick
rugs, etc., which might block the air inlet or outlet. The fan heater must only be
placed on a firm, level and dry surface.
• Never use the fan heater in rooms where flammable liquids, gases or combustible
materials are stored.
• Do not place the fan heater where there is a risk of it falling into water or other liquid.
• Bear in mind that the fan heater consumes a lot of power. Do not overload your
electrical circuit by using too many electrical appliances at the same time as
the fan heater.
Warning: Do not cover.
Operating instructions
Note: The fan heater is fitted with a tip-over switch which switches the heater off if it
leans or falls over. The safety tip-over switch feature requires that the fan heater be
completely vertical in order for it to operate.

Product description

1. Carrying handle
2. Thermostat knob
3. Foot
4. Tip-over switch
5. Indicator light
6. Power selector
1
2
3
4
4
6
5