Herunterladen Inhalt Inhalt Diese Seite drucken

Switching Off In Case Of Error; Cleaning, Maintenance And Ordering Of Spare Parts; Ordering Replacement Parts; Storage - EINHELL BT-VT 600 Originalbetriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Anleitung_BT_VT_600_SPK7:_
GB

7.2 Switching off in case of error

Under the following circumstances the voltage
transformer automatically switches off:
Input voltage is lower than 10-10.5 V
Input voltage rises above 15 V
The appliance overheats.
In these situations, switch OFF the appliance using
the ON/OFF switch and remove the attached 230 V
consumer. Check whether all of the ventilation
openings on the voltage transformer are clear and
switch the voltage transformer back on after about 10
minutes waiting time.
8. Cleaning, maintenance and ordering
of spare parts
Before carrying out work on the appliance, cut out the
(12V) electrical power supply.
8.1 Cleaning
Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible.
Wipe the appliance with a clean cloth or blast it
with compressed air at low pressure.
We recommend that you clean the appliance
immediately after you use it.
Clean the appliance regularly with a damp cloth
and some soft soap. Do not use cleaning agents
or solvents; these may be aggressive to the
plastic parts in the appliance. Ensure that no
water can get into the interior of the appliance.
8.2 Maintenance
There are no parts inside the appliance which require
additional maintenance.
8.3 Changing the fuse
If the voltage transformer becomes overloaded, the
35 A flat fuses on the rear side of the appliance will
melt. Unscrew the protective caps and replace the
faulty fuse with a fuse of the same type. Put the
protective caps back on. Determine the cause which
led to overload of the voltage transformer.
Note: A replacement fuse can be obtained from a
specialist car component dealer
16
15.06.2009
13:06 Uhr
Seite 16

8.4 Ordering replacement parts

Please provide the following information on all orders
for spare parts:
Model/type of the appliance
Article number of the appliance
ID number of the appliance
Spare part number of the required spare part
For our latest prices and information please go to
www.isc-gmbh.info

9. Storage

The appliance should be stored in a dry place and
covered, if possible.

10. Disposal and recycling

The appliance is supplied in packaging to prevent its
being damaged in transit. This packaging is raw
material and can therefore be reused or can be
recycled. The appliance and its accessories are
made of various types of material, such as metal and
plastic. Defective components must be disposed of
as special waste. Ask your dealer or your local
council.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis