Technical Characteristics; Características Técnicas; Caractéristiques Techniques; Technische Daten - Ecler EDRIVE 600 Bedienungsanleitung

11. TECHNICAL CHARACTERISTICS

11. CARACTÉRISTIQUES TECHNIQUES
General
Inputs
Input Impedance
Maximum Input level
Outputs
Output Impedance
Maximum Output Level
Sample Rate
Bit Depth
Frequency Response
THD
Dynamic Range
Serial Comms Data
Processing
Gain
Output Ch. Source
HP filter frequency
LP filter frequency
LP / HP filter type
Delay
Limiter
EQ frequency
EQ gain
EQ width
Connectors
Audio inputs
Audio outputs
Serial comms
Network comms
Mains
Mains Power
Consumption
Dimensions
Weight
70
11. CARACTERÍSTICAS TÉCNICAS

11. TECHNISCHE DATEN

2
> 10k Ohm Electronically balanced
+20dBu
6
<100 Ohm, ground balanced
+202dBu into 600ohm load
96kHz
24 bit
10Hz to 40kHz, +/- 3dB (filters disabled)
20Hz to 20kHz, +/- 0.5dB (filters disabled)
<0.01%, (+10dBu, 20Hz to 20kHz, 30kHz bandwidth)
>112dB (A weighted, 22kHz bandwidth)
>109dB (un-weighted, 22kHz bandwidth)
38.4kbaud, format: 8 data, 1 stop, no parity
+20dB to -80dB and mute, 0.2dB steps
Input A, Input B and SUM
Off, 10Hz to 25.4kHz, 1/36 octave steps
10Hz to 25.4kHz and off, 1/36 octave steps
12, 18 & 24dB/octave Bessel and Butterworth
12, 24 and 48dB/octave Linkwitz Riley
th th
4 or 8 order Hardman
Input 400ms, output 80ms
High performance limiter, adjustable threshold in 0.2dB steps,
automatic time constants
10Hz to 25kHz, 1/36 octave steps
+15dB to -15dB, 0.2dB steps
5.0 to 0.1 octaves bandwidth, 1/36 octave steps
3 pin female XLR
3 pin male XLR
Future option
Future option
3 pin IEC
Universal switch-mode PSU, 90V to 264V AC, 47/63Hz
20VA
44mm (H), 482mm (W), 254mm (D)
2.7 Kgs net