Ce Declaration Of Conformity - Corradi Impact Benutzerhandbuch

CE DECLARATION OF CONFORMITY

The following CE Declaration of Conformity is subordinated to the observance of constraints and indications in the product warranty, as well as the correct installation done by the person in charge in
accordance with the installation and lay-out instructions established by Corradi Spa.
Manufacturer: Corradi Spa
Via G. Brini, 39 - 40128 Bolgna Italy
Model: IMPACT 2 - 3 - 4 runners
Serial number: (see CE marking on product)
Production year: (see CE marking on product)
Usage: (see User manual - Original Instructions and concerning Warranty)
With the following document the company declares on its own responsibility, that the above
mentioned product satisfies the Directives indicated on the side:
INDICATION / CONDITIONS TO WHICH THE USAGE OF THE PRODUCT IS SUBJECT:
The CORRADI product is subject to the installation activity done for the Client.
The Authorized Installer has to draw up and hand over the suitable DECLARATION OF CORRECT INSTALLATION AND CLASSIFICATION OF WIND RESISTANCE to the user, which testifies the correct
installation, in accordance with the instructions supplied by the manufacturer and applied in accordance with the state and morphology of the installation site and corresponding to the using
conditions for which it has been realized.
The Installer has to follow the reference instructions in the "INSTALLATION MANUAL" and "USER MANUAL" .
The Installer fills out and signs the DECLARATION OF CORRECT INSTALLATION AND CLASSIFICATION OF WIND RESISTANCE, in accordance with the model in the USER MANUAL.
THE MANUFACTURER
I declare that the above described product conforms to the indications and requirements in the above mentioned Directives.
CHIEF EXECUTIVE OFFICER
Eng. Gianmarco Biagi
(*) Directives exclusively applicable to products with motorizations and automations [see User manual]
(**) Wind resistance class: the wind resistance class has been verified using installation supports with features as in the Load table in the Installation manual
46 of 119
REFERENCE DIRECTIVES appliable to the following CE Declaration of Conformity
Construction Production Directive 89/106/CEE;
Electromagnetic Compatibility Directive2004/108/CE (*) ;
Machinery Directive 2006/42/CE (*) ;
Low Voltage Directive 2006/95/CE (*) ;
The conformity has been verified with the aid of the following norms:
- Performance requirements, safety included UNI EN 13561:2009
- Wind resistance class: Class 3 (**) ;
CORRADI SPA - USER MANUAL - IMPACT 7 - 04.2011