Warnings And Precautions - Corradi Impact Benutzerhandbuch

WARNINGS AND PRECAUTIONS

PRELIMINARY CHECKS
When you receive the packaged goods, if assembly is not to be
carried out by the dealer, check that all materials are intact and
that no parts are missing.
If you should have any problems, contact the authorised
dealer.
DISPOSING OF PACKAGING
Separate the various packaging materials into their different
categories (cardboard, nylon, polystyrene, etc.) and dispose of
them as local regulations require.
GENERAL WARNINGS
Before carrying out any assembly or maintenance work or
cleaning, make sure that you have understood the instructions
in this manual.
All Corradi products have a specific function as described in
this manual; any use that is improper or different from the one
foreseen, the use of parts that are not genuine, tampering
and/or unauthorised technical modification will free Corradi Srl
from any responsibility for damage to persons, animals or
things.
Installers (fitters and electricians) must have specific expertise
as well as the attitudinal and the physical and mental
requirements to be able to carry out their tasks; they must also
respect the safety regulations in force.
26 of 119
SAFETY PRECAUTIONS
It is good practice to remember that moving parts can be a
hazard.
During all maintenance and repair operations or product
registration, the electric supply must always be disconnected.
It is also advisable to place a warning sign over the mains
supply switch with the following phrase:
"DO NOT TOUCH: work in progress".
Check that no one is near the awning before turning it on
again after maintenance work. After maintenance, always
make sure that manual and electric drives are properly
assembled and that they work correctly; should you encounter
any problems stop the awning immediately and contact
Corradi Srl's technical assistance department.
CORRADI SPA - USER MANUAL - IMPACT
DEMOLITION
On demolition, the parts should be sorted into plastic material
and electric components, which must be disposed of
separately in accordance with the regulations in force.
The awning's metal parts only need to be divided into steel
parts and those made of other metals and alloys, in order to be
forwarded to be melted down and recycled.
7 - 04.2011