Cleaning And Maintenance - Bimar VPC30 Bedienungsanleitung

Fax +32 030 9904733
Once completed, always ensure that all the parts are firmly matched up.
USE
Before each use, ensure that the appliance is in good working order, and that the power cord is not
damaged: if the cord is damaged, it must be replaced by the manufacturer or its service centre or by
someone with a similar qualification in order to prevent any risks.
Plug into the power point.
Running the fan: select the speed required using the knob on the back:
1 – Minimum speed 2 – Medium speed 3 – Maximum speed
The fan can direct the air up or down depending on the angle at which it is
tilted: adjust by rotating the swivel unit (about 180°).
To turn the fan off, turn the selector to "0" and thereafter remove the plug from the plug point.
If the appliance is not being used for long periods of time, remove the plug from the plug point.

CLEANING AND MAINTENANCE

Important: before performing routine cleaning, remove the plug from the mains.
• Make sure the fan is unplugged from the power supply before removing the
protective guard/grid.
• To clean use a soft, damp cloth; do not use steel wool or abrasive products.
• Do not immerse any part of the fan in water or other liquid: in such an event, do not
place your hand into the liquid but first remove the plug from the plug point. Dry the
appliance thoroughly and check that the electrical parts are dry: if in doubt consult a
qualified professional.
• It is important to keep the ventilation holes of the motor free from dust and lint.
• If the appliance is not used for long periods of time, you should store it away from
dust and moisture; we recommend using the original packaging.
• If you decide to no longer use the device, it is recommended that it is made
inoperative by cutting the power cable (first ensure that the appliance has been
unplugged from the power supply), and ensure that any parts that could represent a
risk to playing children are put away (e.g. the fan blades).
•
Do not dump non-biodegradable products; be sure to dispose of them in compliance with existing
regulations. At the end of its life, the product must not be disposed of as part of ordinary waste. It
should be handed in to specific collection centres set up by the municipality, or to retailers who provide
such a service following the purchase of a new device. Disposing of a household appliance separately
avoids possible negative consequences for the environment and human health resulting from
inappropriate disposal and allows the recovery of the materials from which it is made in
order to obtain significant savings in energy and resources. As a reminder of the obligation to
dispose of appliances separately, the product is marked with a crossed-out wheelie bin
symbol.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar (Italy).
The pages must be reproduced and folded in order to obtain
a booklet A5 (+/- 148.5 mm width x 210 mm height). When
folding, make sure you keep the good numbering when you
turn the pages of the I/B. Don't change the page numbering.
Keep the language integrity.
10 30
/
Assembly page 10/32