Declaration Of Conformity; Manufacturer's Warranty - STEINEL CAM light Handbuch

Changing the memory card
• Undo retaining screw and remove
cover ( Fig� 6�1 )
• Insert memory card ( Fig� 6�2 )
• Fit cover and tighten retaining screw
( Fig� 6�4 )
Restoring factory settings
• Press reset button with the key
( Fig� 6�3 )
Note:
Pressing the reset button with the key
will return the camera light to factory
settings.
A signal will be heard every 4 seconds
while the camera light is being returned
to factory settings.
• Fit cover and tighten retaining screw
( Fig� 6�4 )
7� Maintenance and care
The camera light requires no main-
tenance.
Weather conditions may affect the way
the camera light functions. Strong gusts
of wind, snow, rain or hail may cause the
light to come ON when it is not wanted
because the sensor is unable to distin-
guish sudden changes of temperature
from sources of heat. Detector lens and
camera lens may be cleaned with a damp
cloth if they get dirty ( do not use cleaning
agents ).
8� Disposal
Electrical and electronic equipment,
accessories and packaging must be re-
cycled in an environmentally compatible
manner.
Do not dispose of electrical
and electronic equipment as
domestic waste.
EU countries only:
Under the current European Directive on
Waste Electrical and Electronic Equip-
ment and its implementation in national
law, electrical and electronic equipment
no longer suitable for use must be
collected separately and recycled in an
environmentally compatible manner.
9� Declaration of
Conformity
G B
STEINEL Vertrieb GmbH hereby
1
declares that the CAM light conforms to
Directive 2014/53/EU. The full wording
of the EU Declaration of Conformity
is available for downloading from the
following Internet address:
www�steinel�de
10� Manufacturer's
warranty
This STEINEL product has been manu-
factured with great care, tested for prop-
er operation and safety in accordance
with applicable regulations and then
subjected to random sample inspection.
STEINEL guarantees that it is in perfect
condition and proper working order. The
warranty period is 36 months, starting
from the date of sale to the consumer.
We will remedy defects caused by ma-
terial flaws or manufacturing faults. The
warranty will be met by repair or re-
placement of defective parts at our own
discretion. The warranty shall not cov-
er damage to wear parts, damage or
16
defects caused by improper treatment
or maintenance. Further consequential
damage to other objects shall be
excluded.
Claims under warranty shall only be ac-
cepted if the product is sent fully assem-
bled and well packed complete with re-
ceipt or invoice ( date of purchase and
dealer's stamp ) to the appropriate ser-
vice centre or handed in to the dealer
within the first 6 months.
Repair service:
Please ask your nearest service centre
how to proceed for repairing faults not
covered by the warranty or occurring
after the warranty expires.
3
Y E A R Y E A R
MANUFACTURER'S MANUFACTURER'S
WARRANTY WARRANTY
11� Legal Notes
Privacy
The CAM light has been developed for
outdoor use. Laws in your country may
restrict the observation of areas outside
your home or property. Please familiarise
yourself with local legislation. To protect
the privacy of others, install the camera
so that it is unable to film public places,
roads or your neighbour's property.
We also recommend that you inform
relatives, visitors and household
employees about the CAM light and its
function.
Safety
Please note that the app will not
automatically inform you if the CAM light
is activated in emergencies or, for
instance, in the event of burglaries.
If necessary, you must always make
an emergency call. STEINEL Vertrieb
GmbH will not accept any liability for
lacking or incorrect notification or film
sequences.
5
Y E A R
MANUFACTURER'S
WARRANTY
17