Technical Specifications; Troubleshooting - STEINEL CAM light Handbuch

12� Technical specifications
Dimensions ( H × W × D ) 305 × 78 × 131 mm
Power supply 220 - 240 V, 50 / 60 Hz
Power consumption 14.3 W
Luminous flux 781 lm
Efficiency 54 lm/W
Colour temperature 3000 K ( warm white )
Colour rendering index Ra ≥ 80
Life expectancy 50,000 hours ( L70B10 to LM80 )
Sensor technology Passive infrared
Communication Wi-Fi 2400-2483.5 MHz
Transmitter power < 100 mW
Angle of coverage 180° with 45° angle of aperture
Mounting height 1.8 - 2 m
Detection reach 10 m tangential
Light-level setting 10 - 10,000 lux
Night light 0 - 40%
Time setting 1 min, 3 min, 10 min, 15 min
Camera Resolution 1280 × 720 pixels
Dazzle guard
Angle of aperture 110° H / 90° V
Vertical angle 20° to 30°, horizontal angle 45° to
each side
Supports memory cards up to 32 GB ( an 8 GB
memory card is included with the camera light )
Temperature range -10°C to +40°C
IP rating IP44
Protection class I
18
13� Troubleshooting
Malfunction Cause
Camera light without
■ Fuse has tripped, not
power switched ON, break in wiring
■ Short circuit in mains power
supply lead
■ Mains switch OFF
Camera light not ■ Incorrect twilight setting
switching ON
selected
■ Mains switch OFF
■ Fuse has tripped
Camera light not ■ Continued movement within
switching OFF
the detection zone
Camera light
■ Camera light not mounted
switches ON without for detecting movement
obvious movement
reliably
■ Movement occurred, but not
identified by the observer
( movement behind wall,
movement of a small object
in immediate lamp vicinity
etc. )
Camera light not ■ Rapid movements are
switching ON
suppressed to minimise
despite movement malfunctioning or detection
zone set too small
■ Incorrect twilight setting
selected
No access to
■ Wi-Fi router is too far from
camera light via app the camera light or building
elements, such as walls, are
obstructing transmission
Smartphone/tablet ■ A terminal device is already
cannot be connect-
connected
ed to camera light
No live image
■ Temperature too high
transmission
Remedy
■ Activate, change fuse, turn
ON power switch, check
wiring with voltage tester
■ Check connections
■ Switch on mains switch
■ Readjust
■ Switch ON
■ Activate, change fuse, check
connection if necessary
■ Check detection zone
■ Securely mount enclosure
■ Check detection zone
■ Check detection zone
■ Readjust
■ Use repeater
■ Press reset button or scan
QR code from connected
terminal device
■ If necessary, deactivate
manual override and let cool
down
19