LaserLiner SuperSquare-Laser Handbuch Seite 5

Read the operating instructions and the enclosed
!
brochure „Guarantee and additional notices"
completely. Follow the instructions they contain.
Safely keep these documents for future reference.
90° Line Laser
The SuperSquare-Laser's two laser lines make it the ideal
instrument for all types of alignment work on the floor. The
long-range laser beams also project very visible laser lines on
walls. The two illuminated spirit levels can be used to obtain
above-floor alignments on walls. The inboard, 90° try-square
edge makes it easy to align the first floor tile. 635 nm laser,
0.05° accuracy of right angle, integrated levelling feet, 1/4"
tripod connection.
General safety instructions
Caution: Do not look directly into the beam. Lasers must be
kept out of reach of children. Never intentionally aim the device
at people. This is a quality laser measuring device and is 100%
factory adjusted within the stated tolerance. For reasons of
product liability, we must also draw your attention to the
following: Regularly check the calibration before use, after
transport and after extended periods of storage. We also wish
to point out that absolute calibration is only possible in a
specialist workshop. Calibration by yourself is only approximate
and the accuracy of the calibration will depend on the care
with which you proceed.
This is a precision instrument product which must be
!
handled with care. Avoid impacts and jarring. Store and
transport the instrument in its case! All lasers off! Clean
with a soft cloth and glass cleaner.
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mw · 635 nm
EN 60825-1:2007-10
SuperSquare-Laser
05
GB