Leds And Buttons - Asus PL-AC56 Kit Kurzanleitung

LEDs and buttons

LED
2.4G /5G
Wi-Fi
Powerline
Ethernet
Power
BUTTON
Clone Press and hold the button for about one second to start
cloning the parent AP's SSID and password.
Pair Press and hold the button for about one second to start
the pairing process.
Reset Press and hold the button for about five seconds to restore
your device to the factory default settings.
STATUS
Blinking Your PL-AC56 is cloning the parent
rapidly AP's SSID and password.
Blinking every Your PL-AC56 is resetting to the
second factory default settings.
On The device is connected to one or
more powerline devices.
Off The device is not connected to any
powerline devices.
Blinking In Power-Saving mode, the power-
line LED blinks every 15 seconds.
On/Off A device is connected or not con-
nected to the Ethernet port.
Blinking The powerline adapter is transfer-
ring data via the Ethernet port.
On/Off Your device is on/off.
When switched on, the power LED
turns from red to green in about
one minute, indicating that it is
ready to use.
Blinking Blinking every second: Pairing is in
progress.
DESCRIPTION
DESCRIPTION