Removing The Device; Operation - eQ-3 RM201 Montage- Und Inbetriebnahme Anleitung

Operation

• Turn the smoke alarm afterwards in a clockwise direction into the
ceiling bracket until it clicks into place (see „Fig. 7: Latching the smoke
alarm" on page 31).
• To remove the smoke alarm, press the release lever and turn the
device anticlockwise.

5.2.3 Removing the device

If you want to remove the device from the ceiling bracket, please press
the latch to open the locking and turn the device out of the ceiling bra-
cket.
6 Operation
In observation mode, the device LED shortly flashes red every 43 sec.
After an alarm ends, the next 24 hours the LED will then shortly flash red
twice every 43 sec.
During normal operation, a function test can be performed via the oper-
ating button. If an alarm is triggered you can mute the device for 10 min.
via the operating button.
32