Function - eQ-3 RM201 Montage- Und Inbetriebnahme Anleitung

Function

Do not leave packaging material lying around. Plastic films/bags,
pieces of polystyrene, etc. can be dangerous in the hands of a
child.
The smoke alarm must not be painted over or covered with
wallpaper. The smoke inlet openings may not be covered or
concealed.
The device must not be modified in any way. The manufacturer is
not responsible for the consequences of improper use, which will
also render all warranty claims invalid.
Smoke alarms detect smoke, no flames.
The loud warning sound may damage your hearing. Protect
your hearing during the function test.
The smoke alarm only monitors a specific zone in the surround-
ing of where it is fitted.
3 Function
The Smoke Alarm RM201 monitors a room for smoke emissions. Opera-
tion of the device is based on the photoelectric scattered light principle.
This enables a fire to be detected at an early stage and a warning to be
given in good time before dangerous smoke gases are present.
When an alarm has been triggered, the integrated siren sounds and the
warning LED will start to flash red. A white LED acts as emergency light-
ing for easy orientation also in the event of power failure.
The integrated LED only serves as emergency light and is not to
be used as room lighting.
24