Led Lenser SEO 3 Bedienungsanleitung Seite 3

LED LENSER® * SEO 3
5.2 Light Program "Red Night Vision"
If the Lighting Program "Red Night Vision" is
enabled (see Point 5), you can use the red light of
the head lamp.
When the switch button is pressed, when the SEO
3 is off, the head lamp glows in the Light Function
Power at full brightness in red. When you switch a
second time within 2 seconds, the SEO 3 blinks in
the Light Function Signal (slow even flashing).
The Light Function Signal is the last Light Function
that can be used in the Light Program "Red Night
Vision" so additional switching turns SEO 3 off
and the circle starts again with the Light Function
Power when you press the switch button again.
So the Light Functions are in a loop. But please
note that you turn off the head lamp by every
switching if since the previous switching more
than 2 seconds have elapsed. For example in case
you let pass more than 2 seconds after you turned
the Light Function Power on the next switching
will not change to head lamp to Light Function
Signal but will turn the SEO 3 off.
6. "Transport Lock"
Under Point 5 it has been described how to
switch between the white and the red LED. This
takes place when the SEO 3 is off and the switch
button is pressed only for approx. 2 seconds.
The head lamp will change from red to white
or from white to red. But when the switch is
pressed longer (approx. 5 seconds) until the
light turns off you have enabled the "Transport
Lock". Then the SEO 3 can not be turned on again
but the red LED flashes for a short moment to
indicate that this function is activated in case the
switch button is pressed. The SEO 3 therefore
cannot be switched on, either intentionally or
unintentionally and inadvertently consume
energy.
Only when you hold the switch button pressed
for 5 seconds again this function ("Transport
Lock") is deactivated again and the lamp is in the
Light Program White.
7. Reset function
If the used alkaline batteries are taken out the
battery box you have "reset" the SEO 3. You have
thus reset two functions:
- The "Transport Lock" (s. Point 6) is deactivated
- The Light Program White (s. Point 5) is activated
8. Use of rechargeable batteries
Only use 3 x Alkaline battery AAA/LR03/Micro
(1.5 V DC) or 3 x NiMH-Accumulator AAA/LR03/
Micro (1.2 V DC) in your SEO 3. Please change
all alkaline batteries respectively rechargeable
batteries (i.e. accumulators) in time.
The scope of delivery of the SEO 3 includes
alkaline batteries. This type of battery cannot be
charged resp. recharged.
9. Changing of the batteries / accumulators
Prior to the change, please turn off the SEO 3.
On the wide side of the head lamp housing is the
cover of the battery box. Nearby the switch button
there is a plastic lip. If this lip is carefully pressed
a little with e.g. your thumb up a little, the battery
box cover can be folded down by using the small
notches that are to the left and the right of the
switch button.
You can now remove the Alkaline batteries
respectively NiMH-Accumulator and insert new
ones.
During insertion, it is vital the batteries point
4
in the right direction. Therefore, pay attention
to the polarities (+ and -). Both in the battery
box and also on the batteries / accumulators.
Otherwise, the hypothetical risk that batteries or
accumulators are damaged and may explode.
After replacing the cover of the battery box has to
be closed again.
Note – Please ensure that there is no short-
circuit at the contacts of the batteries. The
contacts of the batteries may not be touched
with moist or metallic objects.
10. Headband
If the headband is not already connected to the lamp
unit, proceed as follows.
Thread the end of headband with the narrow plastic
part from the front through the eyelet on the left side
of the head lamp housing. Note the orientation of the
lettering on the headband. Run the headband then
over the cover of the battery box to the eyelet on the
other side of the battery box and run it through it to
the front.
This end of the headband has got to be pulled
through the hole beside the clipper at the plastic
part on the other side of the headband. This elongate
hole has got 4 small bars through which the narrow
plastic part has to be run from the side.
This allows that the complete end is pulled through
this hole and both ends of the headband are
connected to each other.
By using the eye of the clipper the SEO 3 can e.g.
attached to an ear of a belt or a backpack for
transportation.
The third plastic component at the headband can be
used to adjust the length of the headband in order to
fit different head circumferences.
11. Rechargeable batteries / Accumulators
Non rechargeable batteries (e.g. Alkaline batteries)
are not allowed to be charged. Never use non
rechargeable batteries and accumulators together.
Change always all batteries / accumulators at the
same time. Use in the SEO 3 only Alkaline batteries
AAA/LR03/Micro (1.5 V DC) or NiMH-Accumulators
AAA/LR03/Micro (1.2 V DC).
If you intend not to use the item for an extended
period, please take out the batteries respectively the
accumulators in order to avoid damage.
Discharged batteries (or accumulators – when they
can't be recharged any longer) have to be taken out
of the product and properly disposed with regards
to the national laws.
In general, for the disposal of batteries as well as
particularly for Lithium batteries, accumulators
and accumulator packs, the applicable rule is that
they may only be disposed of in discharged state
and in a technically correct manner. Additionally
before disposal it has to be ensured, by sticking
non-conducting adhesive tape over the contacts that
short-circuits are not possible.
Basically, the possibility of short-circuits of batteries
and also accumulators must be eliminated and they
may neither be opened, nor enter the human body in
any way, nor may they be thrown into a fire.
12. Cleaning
For cleaning, please use a dry, lint-free, clean cloth.
If salt water is spilled on the head lamp, it must be
immediately entirely removed with such a cloth.
The headband can be washed in a washing machine
at 30 °C.
13. Scope of delivery
The SEO 3 incl. headband is supplied with the
following accessories:
- Alkaline batteries AAA/LR03/Micro (1.5 V DC)
- Operating manual
Additional accessories for the SEO 3 are being
designed. You can get information on these
additional accessories over and above the
supplied kit on our Internet page.
14. Caution
Do not swallow any small parts or batteries
that are present. The products or parts thereof
(including batteries) must be stored outside the
reach of children.
For reasons of safety and approval (CE), the
product must not be modified and/or changed.
The product is to be used exclusively as battery
powered lamp. If the SEO 3 is used for any other
purpose, or used incorrectly, it can get damaged
and hazard-free use is not guaranteed any
more (danger from fire, short-circuit, electric
shock etc.). There is then no liability for harm
to persons or damage to property, and the
warranty of the manufacturer is also rendered
null and void.
The temperature range in which the SEO 3 can
be operated is -20 C° to +50 C°. Ensure that
the SEO 3 is not subjected to more extreme
temperatures, intense vibrations, explosive
atmosphere, solvents and/or vapours.
Also continuously exposed to direct sunlight,
high humidity and/or moisture have to be
avoided.
Changes, repairs and maintenance over and
above those described in the documents
accompanying the product may only be carried
out by authorised technical personnel.
Once it is found that the product is filled with full
batteries in correct orientation (polarity!) and
correctly closed, but nonetheless a normal, safe
operation is not possible or the product shows
damage, it must be rendered inoperative and
not used any further. In this case, for warranty
matters, contact your dealer.
15. Safety instructions
• This product is not a children's toy.
• Since it has small parts that can be swallowed,
it is not suitable for persons below 5 years.
• The article may not be used for examinations
of the eyes (e.g. for the so-called pupil test).
• When using it, the accumulation of heat, e.g. by
covering, must be avoided.
• If the product does not work correctly, the first
thing that must be checked is whether this is
due to discharged batteries or because these
are not inserted correctly.
• If using in traffic, please follow the respective
legal regulations.
The hazard that poses the main threat in this
product through optical radiation is the Blue-
Light-Hazard (400 nm to 780 nm). Thermal
hazard threshold values are clearly not reached.
The risk for the viewer depends on the use or
on how the product is installed. However, there
is no optical hazard as long as the aversion
responses limit the time of exposure and as long
as the information contained in this instruction
manual is observed.
The aversion reactions are triggered by the
GB
exposure and they are to mean all natural
reactions that protect the eye from hazards
through optical radiation. This includes in
particular conscious aversion reactions such as
eye or head movement (e.g. turning away).
When using the product it is of particular
importance to bear in mind that the aversion
reactions of persons at whom the light is
directed at may be weakened or completely
suspended as a result of medication, drugs or
illness.
Because of the blinding effect of the product,
improper use may lead to reversible, i.e.
temporary impairment of sight (physiological
blinding) or afterimages, or it may trigger feeling
unwell in the sense of feeling queasy and tired
(physiological blinding). The intensity of the
temporary feeling of being unwell or the time until
it subsides depend primarily on the difference in
brightness between the blinding-light source and
the surrounding area. Photosensitive persons in
particular ought to consult a medical consultant
prior to using this product.
As a matter of principle the rule is that high-
intensity light sources carry a high secondary
hazard potential due to their blinding effect.
Just like looking into other bright light sources
(e.g. headlights of a car), the temporary limited
impairment of vision and afterimages may lead
to irritation, inconveniences, impairments and
even accidents, depending on the situation.
The information applies to the use of a single
product. If more light-emitting products of
the same type or of a different type are used
together, the intensity of the optical radiation
may increase.
Every longer viewing/eye-contact with the
source of radiation of this product by the user
or other persons, with and without other light-
bundling instruments, is to be avoided as a
matter of principle! Instead, the eyes are to be
closed deliberately in such cases and the head
ought to be turned away from the light beam.
In case of a commercial use or the product's use
by public bodies, the user must be instructed
as to all applicable laws and regulations that
correspond to the individual case of usage.
Important rules of conduct:
• Do not aim the light beam directly into the eyes
of a person.
• The user or any other person should not look
directly into the light beam.
• In the event of optical radiation hitting the eye,
the eyes must deliberately shut and the head is
to be turned away from the beam.
• The instruction manual and this information
must be stored safely and must be passed on
together with the product.
• It is prohibited to look straight into the light
that is being emitted by this product.
5