Grundig XACT MC 7240 Bedienungsanleitung Seite 26

OPERATION _____________________________
Using the speed setting
touch controls
turn the trimmer on/off
Once the trimmer has been turned
on with the on/off switch
may be switched off or on again
by using the speed setting touch
controls
1
Slide the finger rapidly from
to to turn the trimmer off.
– The appliance remains in
standby mode.
2
To switch on the trimmer again,
slide the finger in reverse direc-
tion, from
Note
After two minutes in standby
7
mode, the trimmer switches off
completely automatically.
Adjusting the operating
speed
The operating speed of the trimmer
can be adjusted by using the speed
setting touch controls
26 ENGLISH
E
.
E
to .
E
.
1
Keep the speed setting touch
control
to
crease the speed and keep the
speed setting touch
control
, it
F
crease the speed.
Notes
Two short beeps indicate that
7
the min or max speed settings
have been reached.
The selected setting is saved dur-
7
ing the standby mode.
Touch control lock function
After switching on the appliance,
adjust the speed, then press the
power button for about 1-2 sec-
onds.
–  T he touch panel light will dim to
indicate that the touch feature is
locked.
To release the lock function, sim-
ply repeat the same procedure by
pressing the power button for 1-2
seconds.
–  T he touch panel lights up again
to indicate that the touch feature
is unlocked.
pressed to de-
E
pressed to in-
E