Brief Description; What's In The Box - SE 2200 Bedienungsanleitung

Thank you
We would like to thank you cordially for choosing this sE microphone! This manual contains some
important instructions for setting up and operating your new equipment. Please take a few
minutes to read the instructions below carefully. We hope you will enjoy working with it as much
as we enjoyed designing and building it for you.
Most Sincerely,
Your sE Team

Brief Description

The sE2200 is the latest version of the fan-favorite condenser that put sE Electronics on the map
many years ago with its smooth, polished sound for vocals, voiceovers, and numerous
instrumental applications. Like its predecessors, the sE2200 is a high-quality condenser
microphone intended for a wide range of studio applications, from vocals and spoken word to
acoustic instruments to drums and beyond. Thanks to its hand-crafted large-diaphragm true
condenser capsule, shielded custom transformer and class-A circuitry (no ICs here!) it delivers
pristine, flattering sound quality, exceptionally low noise, and an even, well-balanced frequency
response.
The electronics and the switchable attenuation pads ensure a high dynamic range, with high
sound pressure level (SPL) handling capability and extremely low-noise components. The
switchable low-cut filters eliminate rumble or footfall noise, and can also compensate for an
excess of bass frequencies caused by the proximity effect. This enables the sE2200 to close-mic
many instruments including electric guitar speaker cabinets, brass instruments and drums.
Reliable operation even in demanding applications in difficult environments is ensured by the
roadworthy all-metal design, robust construction, and high-quality manufacturing standards.

What's in the box

Your packaging should contain the follow items. If anything is missing, please contact your sE
Electronics dealer and let them know.
• sE2200 microphone
• sE Isolation Pack (shock mount, pop filter)
thread adapter
•
Controls
The sE2200 features a switch for the attenuation pads and a switch for the low-cut filters.
Attenuation Switch
The Attenuation Switch is located on the front-left side of the
microphone. When switched on, the incoming signal is reduced by
either 10 or 20 dB for capturing of loud instruments and/or close-
miking without distortion. Using the switch also helps prevent
overloading the input stage of recording interfaces, mixing desks and
microphone preamps.
2
User Manual - EN