Conrad Electronic 75 11 57 Bedienungsanleitung Seite 30

F LED „CH4"
Is lit as soon as video channel 4 is currently displayed on the monitor.
Blinks as soon as a signal loss is detected on video channel 4.
This is a status LED, which has different meanings depending on the programming mode. To
assign the corresponding status, please read chapter 10, 11, 12.
G LED „CH3"
Is lit as soon as video channel 3 is currently displayed on the monitor.
Blinks as soon as a signal loss is detected on video channel 3.
This is a status LED, which has different meanings depending on the programming mode. To
assign the corresponding status, please read chapter 10, 11, 12.
H LED „CH2"
Is lit as soon as video channel 2 is currently displayed on the monitor.
Blinks as soon as a signal loss is detected on video channel 2.
This is a status LED, which has different meanings depending on the programming mode. To
assign the corresponding status, please read chapter 10, 11, 12.
I LED „CH1"
Is lit as soon as video channel 1 is currently displayed on the monitor.
Blinks as soon as a signal loss is detected on video channel 1.
This is a status LED, which has different meanings depending on the programming mode. To
assign the corresponding status, please read chapter 10, 11, 12.
30