Orienting The Interactive Whiteboard (Windows 7/8) - Olivetti OLIBOARD – 80T Benutzerhandbuch

Orienting the Interactive Whiteboard (Windows 7/8)

This function serves to tune the whiteboard for the image to be projected onto it.
Execute the "orientation" the first time you install the Oliboard Driver or if the
position of the projector or the Interactive Whiteboard changes, or if the display
mode changes (e.g. the image size or resolution).
1. Click "Start"  Control Panel"  "Tablet PC setting"".
2. Select the calibration function in the displayed window. A window will be
displayed.
3. With the finger or the whiteboard pen, click on the mid-point of the cross "+" on
the whiteboard. Repeat this same operation for all the other orientation points,
being careful to canter well the mid-point of the flashing cross with the electronic
pen.
4. Save orientation.
8 OLIBOARD - Interactive Whiteboards