Kompernass E-4573 Bedienungsanleitung Seite 21

 Connect the water pump power cable to the transformer
power cable and plug the transformer in a mains socket. Your
natural-stone water fountain is ready for operation again.
. Remedy of faults
.. Water-resistant lamp does not work
If the water-resistant lamp is not working, replace the halogen
bulb.
To do so ...
 Unplug the transformer, wait 10 minutes to cool the lamp.
 Disconnect the water pump power cable from the transfor-
mer power cable.

Remove the decorative stones from the stairs. Take the natu-
ral-stone "stairs" body with the fixed water pump and place
it beside the water tank.
 Turn the natural-stone "stairs" body backside down. The bot-
tom of the natural-stone "stairs" body with the fixed water
pump and the water-resistant lamp are in front of you.
 Pull the water-resistant lamp from the opening of the na-
tural-stone "stairs" body and dry it carefully.
 Carefully twist and pull the protection glass to remove the
lamp from the holder.
 Pull the halogen bulb from its holder.
Attention!
Never touch the halogen bulb with fingers - it may be da-
maged!

Replace the halogen bulb (12 V/10 W) by a new one using
a smooth cloth.
 Carefully push back and twist the protection glass to its
holder.
 Replace the water-resistant lamp to its original position on
the natural-stone "stairs" body.
 Replace the natural-stone "stairs" body and the water pump
to their original position in the water tank. Decorate the
stairs with the stones.
 Connect the water pump power cable to the transformer
power cable and plug the transformer in a mains socket. Your
natural-stone water fountain is ready for operation again.
IRL
Operating Instructions | 