Intenso PHOTOACTOR Bedienungsanleitung Seite 9

1) Connect and switch on the digital photo frame
Please note:
- The plug must be placed next to the device so to be easily accessible.
- Do not open the box of the line adapter. If the box is open, there is danger of life caused by electric shock. The
product does not contain parts to be maintained.
- Actuate the line adapter only with earthed plugs of AC 100-240V~, 50/60 Hz. If you are not sure about the provision
of electricity at the installation point, ask your energy provider.
- Use the included line adapter and line connection cable only.
2) Insert memory cards | connect USB data carriers
The following memory card formats can be used with your digital photo frame:
Secure Digital Card (SD™)
Secure Digital High Capacity (SDHC™)
Multimedia Card (MMC™)
Note: The digital photo frame is exclusively designed for the use with compatible memory cards and 2.0 data media (100 mA).
Connect the Power Adapter supplied with the frame (DC-IN).
Plug the other end of the Adapter into the Socket. The photo
frame will now start automatically. Hold down the Power button
briefly to turn it off or on again.
Insert the Memory Card with the Logo towards the Display
into the card reader slot.
Please note: Never insert cards by use of force!
USB data carriers can only be plugged into
the USB slot in one direction.
Please note: Never insert USB data carriers
by use of force!
GB - 2