Ite 8212F Raid Configurations - Asus P5GD1 Bedienungsanleitung

5.4.3 5.4.3 5.4.3 ITE ITE ITE
5.4.3 5.4.3 ITE ITE
The ITE ® 8212F IDE RAID controller supports RAID 0, RAID 1, RAID 0+1 and
JBOD configurations. Use the IT8212 BIOS Setup Utility or the ATA RAID
Manager application to configure a disk array.
Setting the BIOS RAID items Setting the BIOS RAID items
Setting the BIOS RAID items Setting the BIOS RAID items Setting the BIOS RAID items
After installing the hard disk drives, make sure to set the necessary RAID
items in the BIOS before setting your RAID configuration.
To set the BIOS RAID items:
1. Boot the system and press <Del> during the Power-On Self-Test
(POST) to enter the BIOS Setup Utility.
2. From the A d v a n c e d > O n b o a r d D e v i c e s C o n f i g u r a t i o n
in the BIOS, set the I T E 8 2 1 2 F C o n t r o l l e r
3. Save your changes and exit Setup.
Entering the ITE Entering the ITE Entering the ITE
Entering the ITE Entering the ITE
To enter the ITE
1. Boot up your computer.
2. The ITE8212F controller scans for IDE devices attached on the IDE
RAID ports. When prompted, press <Ctrl+F> or <Ctrl+E> to display
the main menu of the utility.
IT8212 Setup Utility (C)Copyright 2002-2004 ITE, Inc.
[1]..[5] Select
5 - 2 2 5 - 2 2 5 - 2 2
5 - 2 2 5 - 2 2
® ® ® ® ® 8212F RAID configurations 8212F RAID configurations 8212F RAID configurations
8212F RAID configurations 8212F RAID configurations
A d v a n c e d > O n b o a r d D e v i c e s C o n f i g u r a t i o n menu A d v a n c e d > O n b o a r d D e v i c e s C o n f i g u r a t i o n A d v a n c e d > O n b o a r d D e v i c e s C o n f i g u r a t i o n A d v a n c e d > O n b o a r d D e v i c e s C o n f i g u r a t i o n
I T E 8 2 1 2 F C o n t r o l l e r I T E 8 2 1 2 F C o n t r o l l e r
I T E 8 2 1 2 F C o n t r o l l e r I T E 8 2 1 2 F C o n t r o l l e r item to RAID Mode.
® ® ® ® ® 8212F Setup Utility 8212F Setup Utility 8212F Setup Utility
8212F Setup Utility 8212F Setup Utility
® 8212F Setup Utility:
[MAIN MENU]
Auto Configuration...........[ 1 ]
Define RAID..................[ 2 ]
Delete RAID..................[ 3 ]
Rebuild RAID.................[ 4 ]
RAID Card Configuration......[ 5 ]
[ESC] Exit
C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t
C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t