Asus P5GD1 Bedienungsanleitung Seite 119

At the bottom of the screen are the navigation keys. These keys allow you
to move through and select menu options.
[ ]-Change
Creating a RAID Volume Creating a RAID Volume
Creating a RAID Volume Creating a RAID Volume Creating a RAID Volume
To create a RAID volume:
1. From the Intel Application Accelerator RAID Option ROM utility main
menu, select 1 . C r e a t e R A I D V o l u m e
following screen appears.
Intel(R) Application Accelerator RAID Option ROM v4.0.0.6211
Copyright(C) 2003-04 Intel Corporation. All Rights Reserved.
Enter a string between 1 and 16 characters in length taht can be used
to uniquely identify the RAID volume. This name is case sensitive and
[ [ ]-Change ]-Change
2. Key-in a unique name for your RAID volume then press <Enter>.
3. Use the up or down arrow keys to select your desired RAID Level then
press <Enter>.
a. If you selected RAID 0 (Stripe), use the up or down arrow keys to
select the stripe size for your RAID 0 array then press <Enter>.The
available values range from 8 KB to 128 KB. The default selection
is 128 KB. The strip value should be chosen based on the planned
drive usage.
• 8 /16 KB - low disk usage
• 64 KB - typical disk usage
• 128 KB - performance disk usage
A S U S P 5 G D 1 A S U S P 5 G D 1 A S U S P 5 G D 1
A S U S P 5 G D 1 A S U S P 5 G D 1
[TAB]-Next [ESC] Previous Menu
1 . C r e a t e R A I D V o l u m e 1 . C r e a t e R A I D V o l u m e then press <Enter>. The 1 . C r e a t e R A I D V o l u m e
1 . C r e a t e R A I D V o l u m e
[ CREATE ARRAY MENU
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
[
can not contain special characters.
[TAB]-Next [TAB]-Next [ESC] Previous Menu [ESC] Previous Menu
[Enter]-Select
]
RAID_Volume1
RAID0(Stripe)
Select Disk
128KB
149.0GB
HELP ]
[Enter]-Select [Enter]-Select
5 - 1 9 5 - 1 9 5 - 1 9
5 - 1 9 5 - 1 9