Maintenance And Cleaning; Technical Data - Renkforce 1404208 Bedienungsanleitung

• Disconnect the USB cable from the computer after use. Depending on the
operating system, some connected USB devices must be ejected/disconnected
first before they can be safely removed. Refer to the instructions of your operating
system. The LED operating control lamp turns off.
The product does not feature an independent on/off switch and is therefore
always switched on when connected to a USB power supply.

Maintenance and cleaning

• Never use aggressive or abrasive cleaning agents, rubbing alcohol or other
chemical solvents, as those can damage the housing or even affect the operation
of the product.
• Besides occasional cleaning, the product is maintenance-free. There are no user-
serviceable parts inside the product. Therefore never open the product.
• Disconnect the product from the power supply before each cleaning.
• To clean the product, use a soft, anti-static and lint-free cloth. You can easily remove
dust using a long-haired, soft and clean brush.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection
of the environment.

Technical data

Operating voltage...........................5 V/DC, 500 mA (via USB 2.0)
Frequency response ......................40 Hz – 16000 Hz
Sensitivity ........................................-52 dB ± 3 dB (0 dB=1 V/Pa at 1KHz)
Impedance ......................................250 Ω ±30 % (at 1KHz)
Directivity ........................................Cardioid
Operating principle ........................Dynamic microphone
Connection ......................................USB 2.0
Supported operating systems ......Windows
Vista (32/64 bits), 7 (32/64 bits), 8.0 (32/64 bits),
8.1 (32/64 bits), 10 (32/64 bits), RT, Mac OS X 10.0,
Mac OS X 10.11 (with USB support), Linux 4.2,
Linux 4.3.3 (with ALSA - driver)
USB cable length ...........................166 cm (without plug)
Thread connector ..........................on the USB microphone: 15.9 mm (5/8")
with screw adapter: 9.5 mm (3/8")
Operating conditions .....................-20 to +60 °C, 0 – 85 % RH
Storage conditions.........................-25 to +70 °C, 0 – 85 % RH
Dimensions (W x H x D).................56 x 190 x 68 mm
Weight ..............................................approx. 525 g
Frequency response
-40
-50
-60
-70
-80
20 50 100 200
Directivity
0
330 30
300
270
240
150
210
180
®
XP (Home, Pro with SP1, SP2, SP3, 32 bits),
500 1K 2K 5K
60
90
120
10K 20KHz
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the
technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE. V1_0116_02-LS