Renkforce 1404208 Bedienungsanleitung Seite 3

Operating instructions
USB microphone
Item no. 1404208
Intended use
The USB microphone of classic design is intended for converting acoustic signals
(sound waves) into electric signals and for recording audio. The USB port must only
be connected to suitable USB ports on computers.
The product is suitable for being screwed onto a microphone tripod or stand with
15.9 mm (5/8") or 9.5 mm (3/8") thread.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this
product. If you use the product for purposes other than those described above, the
product may be damaged. In addition, improper use can cause hazards such as short
circuiting, fire, electric shock etc. Read the instructions carefully and keep them for
future reference. Make this product available to third parties only together with its
operating instructions.
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
Delivery content
• USB microphone
• USB 2.0 cable (B - A)
• Screw adapter
• Operating instructions
Up-to-date Operating instructions:
1. Open www.conrad.com/downloads in a browser or scan
the displayed QR code.
2. Select document type and language and enter the item
number into the search field. After submitting the query
you can download displayed records.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in theses operating instructions, we assume no liability
for any resulting personal injury or damage to property. Such cases will
invalidate the warranty/guarantee.
• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
• Also observe the safety and operating instructions of any other devices
which are connected to the product.
• Do not use force to connect USB plugs. USB plugs can be plugged into a
USB socket only one way.
• Make sure the cable does not get jammed, bent or damaged by sharp
edges when starting operation of or using the product.
• Always guide the USB cable in such way that no one can get trapped by
it. This poses a risk of injury.
• Consult a professional if you require assistance with product operation,
safety or connection.
• Maintenance work, adjustments and repairs may be carried out only by a
professional or at a specialist workshop.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Operating elements
4
Operation
In order to avoid distortions or maladjustments that could damage the
USB microphone, the product must only be connected to a suitable USB
interface. Refer to the connection values under "Technical data".
Make sure there is suitable audio recording software installed and opened
on the computer.
If the USB microphone does not work, even though the LED operating
control lamp (2) lights up, open the sound settings on your computer and
set the USB microphone as standard audio playback device.
Do not over-tighten the screw connections. Over-tightening can cause
damage to the threads and adversely affect stability.
• Place the thread connector (4) on a 15.9 mm (5/8") thread of a microphone tripod or
stand (not included) and screw both parts together.
When using a microphone tripod or stand with 9.5 mm (3/8") thread, first connect
the provided screw adapter and then screw the USB microphone onto the
microphone tripod or stand.
• Ensure stability when installing the microphone tripod or stand.
• Loosen the hexagon socket screw on the microphone joint (3) by turning it slightly
anticlockwise. To do so, use a suitable Allen wrench (not included). Align the USB
microphone to the desired angle. Then retighten the hexagon socket screw turning
it clockwise.
• Reduce the volume of the computer.
• Connect the type B plug of the USB 2.0 cable to the USB port (5).
• Connect the type A plug to an available USB port on your computer. The LED
operating control lamp (2) lights up.
• Wait for your operating system to recognize and install the new hardware. That
will be done automatically.
• Adjust the volume on your computer connected with the USB microphone.
1
2
1 Microphone head grille
2 LED operating control lamp
3 Microphone joint
3
4 Thread connector
5 USB port
5