Hama 44290 Handbuch Seite 5

L L
This active indoor antenna amplifies reception signals and offers the best possible
reception available.
Amplification can be adjusted up to 36/30 dB. Please note the following points when installing
the antenna:
Operating instructions:
• Plug the power cord into an appropriate power source (230V~)
or select a power supply greater than 12V. (power supply not included in delivery)
Analogue reception:
• Connect the indoor antenna cable to the TV (TV); use an F Coax adapter if necessary
• If you have a video recorder, connect the indoor antenna cable to the VCR (TV)
• If you have a cable connection or roof antenna, connect it via the Ant.Ext. jack
Digital terrestrial reception (DVB-T)
• Connect the indoor antenna cable to the DVB-T receiver (set-top box) (TV)
• Connect the DVB-T receiver to the TV (observe the operating instructions for your
set-top box)
• If you have a VCR, connect it to the set-top box
• Switch on the antenna; turn the dial clockwise from 0 (off) up to 100 (maximum amplification)
• Setting up the antenna manually allows you to optimize the reception of the TV stations
you receive.
Different local stations with different transmission power are available depending on your
location. Reception can vary accordingly.
Keep electrical devices out of the reach of children.
Set up the antenna in a stable location. Use only in dry rooms.
Clean the antenna with a damp cloth only.
Switch off the antenna when not in use.
Repair work may only be conducted by a specialist.
Unplug the antenna before opening it!
– 3 –