Werbung
Slovenčina
•
VoiceOver is supported by iPod nano (5th generation) and
iPod shuffle (3rd generation).
1.
Choose an ear cushion size from extra, extra small (XXS) to
•
Voice Control is supported by iPhone 3GS and iPod touch
large (L), or the Comply™ (foam) Tips, whichever best fits your
(Late 2009).
ears. Selecting the correct ear cushion size helps ensure a
•
Volume control functionality is not available with BlackBerry
comfortable fit and seal to achieve optimal sound quality.
devices.
2.
Attach ear cushions to earphone nozzle. Push ear cushion
Troubleshooting
past rib on nozzle so ear cushion will not separate from
nozzle during use.
Visit www.logitech.com/support for troubleshooting.
3.
Insert the headset cable connector into the 3.5 mm
Missing ear cushions: go to www.logitech.com for
headphone jack on your iPod®, MP3 player, cell phone, laptop,
replacements.
or gaming device. Refer to the compatibility section for
Product information: www.logitech.com
supported devices.
Support: www.logitech.com/support (see phone numbers in
4.
Gently insert earphone into your ear for a good seal:
R for
this document)
right ear; L for left. Never remove an earphone from your ear
Product registration: www.logitech.com/register
by pulling on its cable.
Protect your hearing: Read safety guidelines in Important
5.
Hook clip to headset cable. Clip headset cable to your shirt or
Information Document.
blouse to keep headset cable in place.
Română
6.
Headset controls are within easy reach:
a.
Click, or press and hold, for volume up.
1.
Choose an ear cushion size from extra, extra small (XXS) to
b.
Media controls:
large (L), or the Comply™ (foam) Tips, whichever best fits your
•
One click: Play/pause (audio source)
ears. Selecting the correct ear cushion size helps ensure a
comfortable fit and seal to achieve optimal sound quality.
•
One click: Call answer/hang up (cell phone)
2.
Attach ear cushions to earphone nozzle. Push ear cushion
•
Double click: next track (audio source)
past rib on nozzle so ear cushion will not separate from
•
Triple click: previous track (audio source)
nozzle during use.
•
Refer to the compatibility section for supported
3.
Insert the headset cable connector into the 3.5 mm
devices.
headphone jack on your iPod®, MP3 player, cell phone, laptop,
c.
Click, or press and hold, for volume down.
or gaming device. Refer to the compatibility section for
7.
Store by wrapping cable around fingers; place headset inside
supported devices.
carrying case. To clean, remove cushion and wipe with a
4.
Gently insert earphone into your ear for a good seal:
clean cloth.
right ear; L for left. Never remove an earphone from your ear
Compatibility
by pulling on its cable.
•
Audio is supported by all iPod®, iPhone®, and BlackBerry®
5.
Hook clip to headset cable. Clip headset cable to your shirt or
devices.
blouse to keep headset cable in place.
•
The remote and microphone are supported by iPhone®
6.
Headset controls are within easy reach:
3GS, iPod nano® (4th and 5th generation), iPod touch® (2nd
a.
Click, or press and hold, for volume up.
generation), iPod classic® (120GB/160GB), and 2009 models
b.
Media controls:
of MacBook®, MacBook Pro®, and Mac Pro®.
•
One click: Play/pause (audio source)
•
The remote is supported by iPod shuffle® (3rd generation).
•
One click: Call answer/hang up (cell phone)
Requires latest iPod software.
•
Double click: next track (audio source)
•
VoiceOver is supported by iPod nano (5th generation) and
•
Triple click: previous track (audio source)
iPod shuffle (3rd generation).
•
Refer to the compatibility section for supported
•
Voice Control is supported by iPhone 3GS and iPod touch
devices.
(Late 2009).
c.
Click, or press and hold, for volume down.
•
Volume control functionality is not available with BlackBerry
7.
Store by wrapping cable around fingers; place headset inside
devices.
carrying case. To clean, remove cushion and wipe with a
Troubleshooting
clean cloth.
Visit www.logitech.com/support for troubleshooting.
Compatibility
Missing ear cushions: go to www.logitech.com for
•
Audio is supported by all iPod®, iPhone®, and BlackBerry®
replacements.
devices.
Product information: www.logitech.com
•
The remote and microphone are supported by iPhone®
Support: www.logitech.com/support (see phone numbers in
3GS, iPod nano® (4th and 5th generation), iPod touch® (2nd
this document)
generation), iPod classic® (120GB/160GB), and 2009 models
Product registration: www.logitech.com/register
of MacBook®, MacBook Pro®, and Mac Pro®.
Protect your hearing: Read safety guidelines in Important
•
The remote is supported by iPod shuffle® (3rd generation).
Information Document.
Requires latest iPod software.
Български
•
VoiceOver is supported by iPod nano (5th generation) and
iPod shuffle (3rd generation).
1.
Choose an ear cushion size from extra, extra small (XXS) to
•
Voice Control is supported by iPhone 3GS and iPod touch
large (L), or the Comply™ (foam) Tips, whichever best fits your
(Late 2009).
ears. Selecting the correct ear cushion size helps ensure a
•
Volume control functionality is not available with BlackBerry
comfortable fit and seal to achieve optimal sound quality.
devices.
2.
Attach ear cushions to earphone nozzle. Push ear cushion
Troubleshooting
past rib on nozzle so ear cushion will not separate from
nozzle during use.
Visit www.logitech.com/support for troubleshooting.
3.
Insert the headset cable connector into the 3.5 mm
Missing ear cushions: go to www.logitech.com for
headphone jack on your iPod®, MP3 player, cell phone, laptop,
replacements.
or gaming device. Refer to the compatibility section for
Product information: www.logitech.com
supported devices.
Support: www.logitech.com/support (see phone numbers in
R for
4.
Gently insert earphone into your ear for a good seal:
this document)
right ear; L for left. Never remove an earphone from your ear
Product registration: www.logitech.com/register
by pulling on its cable.
Protect your hearing: Read safety guidelines in Important
5.
Hook clip to headset cable. Clip headset cable to your shirt or
Information Document.
blouse to keep headset cable in place.
Hrvatski
6.
Headset controls are within easy reach:
a.
Click, or press and hold, for volume up.
1.
Choose an ear cushion size from extra, extra small (XXS) to
b.
Media controls:
large (L), or the Comply™ (foam) Tips, whichever best fits your
•
One click: Play/pause (audio source)
ears. Selecting the correct ear cushion size helps ensure a
comfortable fit and seal to achieve optimal sound quality.
•
One click: Call answer/hang up (cell phone)
2.
Attach ear cushions to earphone nozzle. Push ear cushion
•
Double click: next track (audio source)
past rib on nozzle so ear cushion will not separate from
•
Triple click: previous track (audio source)
nozzle during use.
•
Refer to the compatibility section for supported
3.
Insert the headset cable connector into the 3.5 mm
devices.
headphone jack on your iPod®, MP3 player, cell phone, laptop,
c.
Click, or press and hold, for volume down.
or gaming device. Refer to the compatibility section for
7.
Store by wrapping cable around fingers; place headset inside
supported devices.
carrying case. To clean, remove cushion and wipe with a
4.
Gently insert earphone into your ear for a good seal:
clean cloth.
right ear; L for left. Never remove an earphone from your ear
Compatibility
by pulling on its cable.
5.
Hook clip to headset cable. Clip headset cable to your shirt or
•
Audio is supported by all iPod®, iPhone®, and BlackBerry®
devices.
blouse to keep headset cable in place.
•
The remote and microphone are supported by iPhone®
6.
Headset controls are within easy reach:
3GS, iPod nano® (4th and 5th generation), iPod touch® (2nd
a.
Click, or press and hold, for volume up.
generation), iPod classic® (120GB/160GB), and 2009 models
b.
Media controls:
of MacBook®, MacBook Pro®, and Mac Pro®.
•
One click: Play/pause (audio source)
•
The remote is supported by iPod shuffle® (3rd generation).
•
One click: Call answer/hang up (cell phone)
Requires latest iPod software.
•
Double click: next track (audio source)
3.
Insert the headset cable connector into the 3.5 mm headphone
jack on your iPod®, MP3 player, cell phone, laptop, or gaming
•
Triple click: previous track (audio source)
device. Refer to the compatibility section for supported devices.
•
Refer to the compatibility section for supported devices.
4.
Gently insert earphone into your ear for a good seal:
c.
Click, or press and hold, for volume down.
ear; L for left. Never remove an earphone from your ear by
7.
Store by wrapping cable around fingers; place headset inside
pulling on its cable.
carrying case. To clean, remove cushion and wipe with a
5.
Hook clip to headset cable. Clip headset cable to your shirt or
clean cloth.
blouse to keep headset cable in place.
Compatibility
6.
Headset controls are within easy reach:
•
Audio is supported by all iPod®, iPhone®, and BlackBerry®
a.
Click, or press and hold, for volume up.
devices.
b.
Media controls:
•
The remote and microphone are supported by iPhone®
•
One click: Play/pause (audio source)
3GS, iPod nano® (4th and 5th generation), iPod touch® (2nd
•
One click: Call answer/hang up (cell phone)
generation), iPod classic® (120GB/160GB), and 2009 models of
MacBook®, MacBook Pro®, and Mac Pro®.
•
Double click: next track (audio source)
•
Triple click: previous track (audio source)
•
The remote is supported by iPod shuffle® (3rd generation).
•
Refer to the compatibility section for supported devices.
Requires latest iPod software.
c.
Click, or press and hold, for volume down.
•
VoiceOver is supported by iPod nano (5th generation) and iPod
shuffle (3rd generation).
7.
Store by wrapping cable around fingers; place headset inside
carrying case. To clean, remove cushion and wipe with a
•
Voice Control is supported by iPhone 3GS and iPod touch
(Late 2009).
clean cloth.
•
Volume control functionality is not available with BlackBerry
Compatibility
devices.
•
Audio is supported by all iPod®, iPhone®, and BlackBerry®
Troubleshooting
devices.
Visit www.logitech.com/support for troubleshooting.
•
The remote and microphone are supported by iPhone®
Missing ear cushions: go to www.logitech.com for replacements.
3GS, iPod nano® (4th and 5th generation), iPod touch® (2nd
generation), iPod classic® (120GB/160GB), and 2009 models of
Product information: www.logitech.com
MacBook®, MacBook Pro®, and Mac Pro®.
Support: www.logitech.com/support (see phone numbers in this
•
The remote is supported by iPod shuffle® (3rd generation).
document)
Requires latest iPod software.
R for
Product registration: www.logitech.com/register
•
VoiceOver is supported by iPod nano (5th generation) and iPod
Protect your hearing: Read safety guidelines in Important
shuffle (3rd generation).
Information Document.
•
Voice Control is supported by iPhone 3GS and iPod touch
Srpski
(Late 2009).
•
Volume control functionality is not available with BlackBerry
1.
Choose an ear cushion size from extra, extra small (XXS) to
devices.
large (L), or the Comply™ (foam) Tips, whichever best fits your
ears. Selecting the correct ear cushion size helps ensure a
Troubleshooting
comfortable fit and seal to achieve optimal sound quality.
Visit www.logitech.com/support for troubleshooting.
2.
Attach ear cushions to earphone nozzle. Push ear cushion past
Missing ear cushions: go to www.logitech.com for replacements.
rib on nozzle so ear cushion will not separate from nozzle
Product information: www.logitech.com
during use.
Support: www.logitech.com/support (see phone numbers in this
3.
Insert the headset cable connector into the 3.5 mm headphone
document)
jack on your iPod®, MP3 player, cell phone, laptop, or gaming
Product registration: www.logitech.com/register
device. Refer to the compatibility section for supported devices.
Protect your hearing: Read safety guidelines in Important
4.
Gently insert earphone into your ear for a good seal:
R for right
Information Document.
ear; L for left. Never remove an earphone from your ear by
pulling on its cable.
Eesti
5.
Hook clip to headset cable. Clip headset cable to your shirt or
1.
Choose an ear cushion size from extra, extra small (XXS) to
blouse to keep headset cable in place.
large (L), or the Comply™ (foam) Tips, whichever best fits your
6.
Headset controls are within easy reach:
ears. Selecting the correct ear cushion size helps ensure a
a.
Click, or press and hold, for volume up.
comfortable fit and seal to achieve optimal sound quality.
b.
Media controls:
2.
Attach ear cushions to earphone nozzle. Push ear cushion past
•
One click: Play/pause (audio source)
rib on nozzle so ear cushion will not separate from nozzle
•
One click: Call answer/hang up (cell phone)
during use.
•
Double click: next track (audio source)
3.
Insert the headset cable connector into the 3.5 mm headphone
jack on your iPod®, MP3 player, cell phone, laptop, or gaming
•
Triple click: previous track (audio source)
device. Refer to the compatibility section for supported devices.
•
Refer to the compatibility section for supported devices.
4.
Gently insert earphone into your ear for a good seal:
c.
Click, or press and hold, for volume down.
ear; L for left. Never remove an earphone from your ear by
7.
Store by wrapping cable around fingers; place headset inside
pulling on its cable.
carrying case. To clean, remove cushion and wipe with a
5.
Hook clip to headset cable. Clip headset cable to your shirt or
clean cloth.
blouse to keep headset cable in place.
Compatibility
6.
Headset controls are within easy reach:
•
Audio is supported by all iPod®, iPhone®, and BlackBerry®
a.
Click, or press and hold, for volume up.
devices.
b.
Media controls:
•
The remote and microphone are supported by iPhone®
•
One click: Play/pause (audio source)
3GS, iPod nano® (4th and 5th generation), iPod touch® (2nd
•
One click: Call answer/hang up (cell phone)
generation), iPod classic® (120GB/160GB), and 2009 models of
MacBook®, MacBook Pro®, and Mac Pro®.
•
Double click: next track (audio source)
•
Triple click: previous track (audio source)
•
The remote is supported by iPod shuffle® (3rd generation).
•
Refer to the compatibility section for supported devices.
Requires latest iPod software.
c.
Click, or press and hold, for volume down.
•
VoiceOver is supported by iPod nano (5th generation) and iPod
shuffle (3rd generation).
7.
Store by wrapping cable around fingers; place headset inside
carrying case. To clean, remove cushion and wipe with a
•
Voice Control is supported by iPhone 3GS and iPod touch
(Late 2009).
clean cloth.
•
Volume control functionality is not available with BlackBerry
Compatibility
devices.
•
Audio is supported by all iPod®, iPhone®, and BlackBerry®
Troubleshooting
devices.
Visit www.logitech.com/support for troubleshooting.
•
The remote and microphone are supported by iPhone®
Missing ear cushions: go to www.logitech.com for replacements.
3GS, iPod nano® (4th and 5th generation), iPod touch® (2nd
generation), iPod classic® (120GB/160GB), and 2009 models of
Product information: www.logitech.com
MacBook®, MacBook Pro®, and Mac Pro®.
Support: www.logitech.com/support (see phone numbers in this
•
The remote is supported by iPod shuffle® (3rd generation).
document)
Requires latest iPod software.
Product registration: www.logitech.com/register
•
VoiceOver is supported by iPod nano (5th generation) and iPod
Protect your hearing: Read safety guidelines in Important
shuffle (3rd generation).
Information Document.
•
Voice Control is supported by iPhone 3GS and iPod touch
R for
Slovenščina
(Late 2009).
•
Volume control functionality is not available with BlackBerry
1.
Choose an ear cushion size from extra, extra small (XXS) to
devices.
large (L), or the Comply™ (foam) Tips, whichever best fits your
ears. Selecting the correct ear cushion size helps ensure a
comfortable fit and seal to achieve optimal sound quality.
2.
Attach ear cushions to earphone nozzle. Push ear cushion past
rib on nozzle so ear cushion will not separate from nozzle
during use.
Troubleshooting
Compatibility
Visit www.logitech.com/support for troubleshooting.
•
Audio is supported by all iPod®, iPhone®, and BlackBerry®
devices.
Missing ear cushions: go to www.logitech.com for replacements.
R for right
•
The remote and microphone are supported by iPhone®
Product information: www.logitech.com
3GS, iPod nano® (4th and 5th generation), iPod touch® (2nd
Support: www.logitech.com/support (see phone numbers in this
generation), iPod classic® (120GB/160GB), and 2009 models of
document)
MacBook®, MacBook Pro®, and Mac Pro®.
Product registration: www.logitech.com/register
•
The remote is supported by iPod shuffle® (3rd generation).
Protect your hearing: Read safety guidelines in Important
Requires latest iPod software.
Information Document.
•
VoiceOver is supported by iPod nano (5th generation) and iPod
Latviski
shuffle (3rd generation).
•
Voice Control is supported by iPhone 3GS and iPod touch
1.
Choose an ear cushion size from extra, extra small (XXS) to
(Late 2009).
large (L), or the Comply™ (foam) Tips, whichever best fits your
•
Volume control functionality is not available with BlackBerry
ears. Selecting the correct ear cushion size helps ensure a
devices.
comfortable fit and seal to achieve optimal sound quality.
Troubleshooting
2.
Attach ear cushions to earphone nozzle. Push ear cushion past
rib on nozzle so ear cushion will not separate from nozzle
Visit www.logitech.com/support for troubleshooting.
during use.
Missing ear cushions: go to www.logitech.com for replacements.
3.
Insert the headset cable connector into the 3.5 mm headphone
Product information: www.logitech.com
jack on your iPod®, MP3 player, cell phone, laptop, or gaming
Support: www.logitech.com/support (see phone numbers in this
device. Refer to the compatibility section for supported devices.
document)
R for right
4.
Gently insert earphone into your ear for a good seal:
Product registration: www.logitech.com/register
ear; L for left. Never remove an earphone from your ear by
Protect your hearing: Read safety guidelines in Important
pulling on its cable.
Information Document.
5.
Hook clip to headset cable. Clip headset cable to your shirt or
blouse to keep headset cable in place.
Italiano
6.
Headset controls are within easy reach:
1.
Choose an ear cushion size from extra, extra small (XXS) to
a.
Click, or press and hold, for volume up.
large (L), or the Comply™ (foam) Tips, whichever best fits your
b.
Media controls:
ears. Selecting the correct ear cushion size helps ensure a
•
One click: Play/pause (audio source)
comfortable fit and seal to achieve optimal sound quality.
•
One click: Call answer/hang up (cell phone)
2.
Attach ear cushions to earphone nozzle. Push ear cushion past
rib on nozzle so ear cushion will not separate from nozzle
•
Double click: next track (audio source)
during use.
•
Triple click: previous track (audio source)
3.
Insert the headset cable connector into the 3.5 mm headphone
•
Refer to the compatibility section for supported devices.
jack on your iPod®, MP3 player, cell phone, laptop, or gaming
c.
Click, or press and hold, for volume down.
device. Refer to the compatibility section for supported devices.
7.
Store by wrapping cable around fingers; place headset inside
4.
Gently insert earphone into your ear for a good seal:
carrying case. To clean, remove cushion and wipe with a
ear; L for left. Never remove an earphone from your ear by
clean cloth.
pulling on its cable.
Compatibility
5.
Hook clip to headset cable. Clip headset cable to your shirt or
•
Audio is supported by all iPod®, iPhone®, and BlackBerry®
blouse to keep headset cable in place.
devices.
6.
Headset controls are within easy reach:
•
The remote and microphone are supported by iPhone®
a.
Click, or press and hold, for volume up.
3GS, iPod nano® (4th and 5th generation), iPod touch® (2nd
b.
Media controls:
generation), iPod classic® (120GB/160GB), and 2009 models of
•
One click: Play/pause (audio source)
MacBook®, MacBook Pro®, and Mac Pro®.
•
One click: Call answer/hang up (cell phone)
•
The remote is supported by iPod shuffle® (3rd generation).
•
Double click: next track (audio source)
Requires latest iPod software.
•
Triple click: previous track (audio source)
•
VoiceOver is supported by iPod nano (5th generation) and iPod
•
Refer to the compatibility section for supported devices.
shuffle (3rd generation).
c.
Click, or press and hold, for volume down.
•
Voice Control is supported by iPhone 3GS and iPod touch
(Late 2009).
7.
Store by wrapping cable around fingers; place headset inside
carrying case. To clean, remove cushion and wipe with a
•
Volume control functionality is not available with BlackBerry
devices.
clean cloth.
Troubleshooting
Compatibility
Visit www.logitech.com/support for troubleshooting.
•
Audio is supported by all iPod®, iPhone®, and BlackBerry®
devices.
Missing ear cushions: go to www.logitech.com for replacements.
R for right
•
The remote and microphone are supported by iPhone®
Product information: www.logitech.com
3GS, iPod nano® (4th and 5th generation), iPod touch® (2nd
Support: www.logitech.com/support (see phone numbers in this
generation), iPod classic® (120GB/160GB), and 2009 models of
document)
MacBook®, MacBook Pro®, and Mac Pro®.
Product registration: www.logitech.com/register
•
The remote is supported by iPod shuffle® (3rd generation).
Protect your hearing: Read safety guidelines in Important
Requires latest iPod software.
Information Document.
•
VoiceOver is supported by iPod nano (5th generation) and iPod
Lietuvių
shuffle (3rd generation).
•
Voice Control is supported by iPhone 3GS and iPod touch
1.
Choose an ear cushion size from extra, extra small (XXS) to
(Late 2009).
large (L), or the Comply™ (foam) Tips, whichever best fits your
•
Volume control functionality is not available with BlackBerry
ears. Selecting the correct ear cushion size helps ensure a
devices.
comfortable fit and seal to achieve optimal sound quality.
Troubleshooting
2.
Attach ear cushions to earphone nozzle. Push ear cushion past
rib on nozzle so ear cushion will not separate from nozzle
Visit www.logitech.com/support for troubleshooting.
during use.
Missing ear cushions: go to www.logitech.com for replacements.
3.
Insert the headset cable connector into the 3.5 mm headphone
Product information: www.logitech.com
jack on your iPod®, MP3 player, cell phone, laptop, or gaming
Support: www.logitech.com/support (see phone numbers in this
device. Refer to the compatibility section for supported devices.
document)
R for right
4.
Gently insert earphone into your ear for a good seal:
Product registration: www.logitech.com/register
ear; L for left. Never remove an earphone from your ear by
Protect your hearing: Read safety guidelines in Important
pulling on its cable.
Information Document.
5.
Hook clip to headset cable. Clip headset cable to your shirt or
blouse to keep headset cable in place.
Česká verze
6.
Headset controls are within easy reach:
1.
Choose an ear cushion size from extra, extra small (XXS) to
a.
Click, or press and hold, for volume up.
large (L), or the Comply™ (foam) Tips, whichever best fits your
b.
Media controls:
ears. Selecting the correct ear cushion size helps ensure a
•
One click: Play/pause (audio source)
comfortable fit and seal to achieve optimal sound quality.
•
One click: Call answer/hang up (cell phone)
2.
Attach ear cushions to earphone nozzle. Push ear cushion past
rib on nozzle so ear cushion will not separate from nozzle
•
Double click: next track (audio source)
during use.
•
Triple click: previous track (audio source)
•
Refer to the compatibility section for supported devices.
3.
Insert the headset cable connector into the 3.5 mm headphone
jack on your iPod®, MP3 player, cell phone, laptop, or gaming
c.
Click, or press and hold, for volume down.
device. Refer to the compatibility section for supported devices.
7.
Store by wrapping cable around fingers; place headset inside
4.
Gently insert earphone into your ear for a good seal:
carrying case. To clean, remove cushion and wipe with a
ear; L for left. Never remove an earphone from your ear by
clean cloth.
pulling on its cable.
5.
Hook clip to headset cable. Clip headset cable to your shirt or
blouse to keep headset cable in place.
6.
Headset controls are within easy reach:
a.
Click, or press and hold, for volume up.
b.
Media controls:
•
One click: Play/pause (audio source)
•
One click: Call answer/hang up (cell phone)
•
Double click: next track (audio source)
•
Triple click: previous track (audio source)
•
Refer to the compatibility section for supported
devices.
c.
Click, or press and hold, for volume down.
7.
Store by wrapping cable around fingers; place headset
inside carrying case. To clean, remove cushion and wipe
with a clean cloth.
Compatibility
•
Audio is supported by all iPod®, iPhone®, and BlackBerry®
devices.
•
The remote and microphone are supported by iPhone®
3GS, iPod nano® (4th and 5th generation), iPod touch® (2nd
generation), iPod classic® (120GB/160GB), and 2009 models
of MacBook®, MacBook Pro®, and Mac Pro®.
•
The remote is supported by iPod shuffle® (3rd generation).
Requires latest iPod software.
•
VoiceOver is supported by iPod nano (5th generation) and
iPod shuffle (3rd generation).
•
Voice Control is supported by iPhone 3GS and iPod touch
(Late 2009).
•
Volume control functionality is not available with BlackBerry
devices.
Troubleshooting
Visit www.logitech.com/support for troubleshooting.
Missing ear cushions: go to www.logitech.com for
replacements.
Product information: www.logitech.com
Support: www.logitech.com/support (see phone numbers in
this document)
R for right
Product registration: www.logitech.com/register
Protect your hearing: Read safety guidelines in Important
Information Document.
Česká republika
Россия
Ελληνική
η οκρατία
R for right
Werbung
