Cleaning And Care - Powerfix Profi PWW 70 A1 Bedienungsanleitung

Assembling the transport casters
♦ Lay the workshop tool trolley on its back. To protect the paintwork, lay the
packaging material underneath it.
♦ Carefully attach the four transport casters
using a rubber mallet (see Fig. 2).
Fig. 2
NOTE
► The transport casters with brakes
the handle bar

Cleaning and care

CAUTION
► Do not use caustic, abrasive or solvent-based cleaning materials.
These could damage the surfaces of the workshop tool trolley.
♦ Clean the workshop tool trolley with a lightly moistened cloth and a mild detergent.
♦ Lubricate the upper and lower drawer runners at least once every six months to
ensure the smooth running of the drawers
Disposal
Do not dispose of the workshop tool trolley in your normal domestic
waste.
Dispose of the workshop tool trolley through an approved disposal centre or at
your community waste facility. Please comply with all applicable regulations.
Please contact your waste disposal facility if you are in any doubt.
PWW 70 A1
/
should be mounted on the side with
.
.
to the workshop tool trolley
GB
MT
7