User Guide: Vac Dynamic And Vac Digital - SACH Vac dynamic Bedienungsanleitung

USER GUIDE
6. VAC USER'S GUIDE
VAC DYNAMIC
1. PANEL
2. RESET BUTTON
3. LOW VOLTAGE LINE
4. POWER SUPPLY SWITCH
5. ELECTRICAL SUPPLY CABLE
6. WALL HANGER
7. DETACHABLE DUST DEPOSIT
HOLDFAST-HANDLE
GENERAL INSTRUCTIONS FOR DYNAMIC MODELS
1. Connect the power cable (5) to the electrical supply. With the DYNAMIC model there is nothing else
you need to do. The central vacuum unit is ready for use. The machine needs to be turned on by depressing
the switch (4) only if you require the central vacuum unit to work in manual mode. It is not necessary
in normal use as the central vacuum unit will start to work when the low-voltage hose is inserted into
an inlet valve.
2. To prepare the hose for use, connect the telescopic wand and the appropriate tool for the type of
floor surface you wish to clean, to the hose handle.
3. Insert the hose cuff into the inlet valve. The central vacuum unit will start to work automatically.
dynamic
26
VAC BY SACH
8. MOTOR
9. EXHAUST OUTLET
10. DIRTY AIR INLET
11. PROTECTIVE FILTER
12. HEPA FILTER
13. COVER HEPA FILTER
14. CYCLONIC CONE
15. DUST CONTAINER
R