Use; Technical Data - Cartrend 50208 Bedienungsanleitung

Use

fastening and loosening fittings
1. Place the appropriate plug nut on the socket holder until it clicks into place. make sure
that the socket is firmly and secure.
2. Plug the power plug into a 230V mains socket.
3. Check the correct direction of rotation before you apply the impact wrench.
• Clockwise rotation "f"
• Counterclockwise rotation "r"
4. Press the rocker switch to turn on the impact wrench.
Caution!
The impact wrench will continue running for a few more turns after it has been turned off.
5. stop the impact wrench by releasing the rocker switch.
6. after you have finished using the impact wrench unplug the power plug from the 230 V
mains socket.
7. remove the socket from the socket holder and store the appliance safely.
8. Using torque wrench, check the screw connection is the specified torque.
note wheel fitting:
after a driving distance of about 50 km the retighten the wheel nuts /screws and check
they are securely fitted.

TeChnICal DaTa

max. torque
Idle speed n
0
supply voltage
rated input power:
Big socket holder (square-end)
Big socket (width)
sound pressure level l
sound power level l
Wa
hand arm vibration a
W
Weight
ambient temperature
Dimensions
Protection class
IP protection class
GB Instructions for use
Counterclockwise rotation (unscrew) 340 mm
Clockwise rotation (screw in) 100 mm
2100 min
230 V / 50 hz
900W
12.7 mm
17 mm, 19 mm, 21 mm, 22 mm
/ K 88 db (a) / 3.0 db (a)
Pa Pa
/ K 99 db (a) / 3.0 db (a)
Wa
9.93 m/s² / 1.5 m/s²
/ K (measurement made in accordance with en
60745-1 and en 60745-2-2)
3.23 kg
-20 to +40 ºC
29.5 x 29.5 x 10 cm
Class II
IP20
1
17