Operation; Cleaning; Storage - Pepcare 16231021 Bedienungsanleitung

04. Operation

WARNING! Make sure to select the right voltage.
The voltage switch must point to the relevant voltage
at your current location!
NOTE: Before using for the first time, switch the device on
for a few minutes and allow it to run at the highest speed and
temperature settings. As a result of the manufacturing process,
a slight odour may be produced. This is not harmful and only occurs
during initial use. Ensure that the room has good ventilation.
Switching on/off and controlling air flow
1. Insert the mains plug into an easily accessible socket.
2. The on/off switch and switch for the power settings allows you to
switch the device on and select the desired power setting:
2 (fast air flow, higher temperature)
1 (slow air flow, lower temperature)
 off
3. After drying, set the on/off switch to 0 (off) and pull out the mains
plug.

20

05. Cleaning

DANGER!
Before cleaning, pull out the mains plug and allow the
device to cool down.
WARNING! Do not use any harsh or abrasive cleaning agents.
Clean the device regularly. Be particularly sure to check that the air
inlet and air outlet are free from dust, hairs and fluff.
• Wipe down the casing and the safety mesh over the air inlet
with a slightly damp cloth.
• Hold the hair dryer with the air outlet facing downwards.
Clean the safety fins with a brush.
• Hold the hair dryer with the air inlet facing downwards. Clean
the safety mesh with a brush.

06. Storage

DANGER!
Do not wrap the cable around the device (cable break
danger!).
• You can use the hanging loop in order to store the device in a
safe and practical manner.
• For space-saving storage of the device you can fold in the
handle.

21