Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
05. Operation
NOTE: before using for the first time, switch the device on for
a few minutes and allow it to run at the highest speed and
temperature settings. As a result of the manufacturing process, a
slight odour may be produced. This is not harmful and only occurs
during initial use. Ensure that the room has good ventilation.
Switching on/off and controlling speed
1. Insert the mains plug into an easily accessible socket.
2. The on/off switch and switch for the speed settings allows you to
switch the device on and select the desired speed for the air flow:
0 = off
= low air flow
= strong air flow
3. After drying, set the on/off switch to 0 (off) and pull out the
mains plug.
Selecting temperature
The switch for the hot air settings allows you to select the desired
temperature for the air flow:
= low temperature
= medium temperature
= high temperature
Cooling function
In order to improve the durability of the hair style, you can use the
button
to cool the section of hair after it has been styled using hot
air.
• Keep the
button held down during the drying process in order
to receive a cool air flow independently of the temperature setting.
• When you no longer require the cool air flow, release the
button.
22
Styling nozzle
The styling nozzle makes it possible to target the air flow at specific
sections of hair.
• Attach the styling nozzle to the front of the hair dryer so that it
clicks into place.
• The styling nozzle can be rotated into any desired position.
• You can remove the cooled styling nozzle from the hair dryer.
06. Cleaning
DANGER!
Before cleaning, pull out the mains plug and allow the
device to cool down.
WARNING!
Do not use any harsh or abrasive cleaning agents.
Clean the device regularly. Be particularly sure to check that the air
inlet and air outlet are free from dust, hairs and fluff.
• Wipe down the casing, the safety mesh over the air inlet and the
styling nozzle with a slightly damp cloth.
• Remove the styling nozzle from the hair dryer. Hold the hair dryer
with the air outlet facing downwards. Clean the safety fins with
a brush.
• Slightly press the safety mesh on the sides and
then pull it off. Hold the hair dryer with the air
inlet facing downwards. Clean the inside and
outside safety mesh with a brush.
23
Werbung
Inhaltsverzeichnis
