Power Supply - Gigahertz Solutions HFE35C Bedienungsanleitung

Made in Germany
For more in-depth analyses
Gigahertz Solutions offers:
Attenuator and amplifiers for expanding the designed range of
the analysers up- and downwards for extra strong and extra
weak sources of pollution.
Frequency filters for a more precise separation of different ra-
dio frequency service bands.
Instruments for HF up to 6 GHz / 10 GHz: For analyses for yet
higher frequencies (up to abt. 6 GHz, including WLAN, WIMAX
and some directional radio sources and aviation radar), we offer
the HFW35C (2.4-6 GHz). A new broad band analyser for 2.4-10
GHz is under development (HFW59B).
Instruments for low frequencies: Electrosmog is not limited to
the Radio Frequency range! Also for the low frequency range
such as power (distribution and domestic installations) and rail-
ways including their higher harmonics we offer a broad range of
affordably priced instruments with high professional standards.
Please refer to our homepage for comprehensive coverage.

Power Supply

Changing the Battery
The battery compartment is at the back of the analyzer. To re-
move the lid, press on the grooved arrow and pull the cap off. The
foam pad inserted pushes the battery against the lid preventing
the heavy battery from rattling. This is the reason for the lid's re-
sistance during opening.
Auto-Power-Off:
This feature conserves energy and extends the total operating
time.
1. In case you have forgotten to turn OFF the HF analyzer or
it has been turned ON accidentally during transport, it will
shut off automatically after 40 minutes of continuous use.
2. If "LOW BATT" appears vertically between the digits in the
centre of the display, the HF analyzer will turn OFF after 2
to 3 min in order to avoid unreliable measurements. It re-
minds you to change the battery as soon as possible.
16
© Gigahertz Solutions GmbH