Led Flashing Sequences And Transmission Behaviour; Information About Radio Operation - eQ-3 MAX! Bedienungsanleitung

9. LED flashing sequences and
The LED's flashing sequences have different meanings:
Flashing
sequence
1x flash
2x flashes
3x flashes

10. Information about radio operation

Radio transmission is performed on a non-exclusive
transmission path, which means that there is a possibility
of interference occurring. Interference can also be caused
by switching operations, electrical motors or defective
electrical devices.
The range of transmission within buildings can differ
greatly from that available in the open air. Besides the
transmitting power and the reception characteristics of
the receiver, environmental factors such as humidity in
the vicinity have an important role to play, as do on-site
structural/screening conditions.
eQ-3 Entwicklung GmbH hereby declares that this
device complies with the essential requirements and other
relevant regulations of Directive 1999/5/EC. You can find
the full declaration of conformity at www.eQ-3.de.
20
transmission behaviour
Meaning
Window open/closed, radio command sent
successfully
Duty cycle has been exceeded. The longest
period to wait before sending again would be
an hour.
Error message: Window open/closed, radio
command not sent