Application Examples - Velleman HAA85BL Bedienungsanleitung

12V-24V AC/DC, no jumper required for voltage selection
• Operation Modes
a) Single user mode, auto or manual code entry
b) Multi-user mode: 100 user codes for output 1 (user number 00-99), auto or manual code entry
• User Code Combinations
a) Single user mode: 10 000
b) Multi-user mode: 111 110 000
• Input Sensing Terminals
a) Egress input: N.O. referring to (-) ground
b) Door position sensor input: N.C. referring to (-) ground
c) Relay 1 stop control: N.O. referring to (-) ground
• Relay Output Contacts
OUTPUT 1: N.C. and N.O. dry contacts, 5A / 30VDC max. rating
OUTPUT 2: N.C. and N.O. dry contacts, 1A / 30VDC max. rating
OUTPUT 3: NPN open collector, 100mA sink / 24VDC max.
• Tamper Switch Contact
N.C. dry contact, 50mA max.
• Duress, Interlock and Key-Active Output Rating
NPN open collector switches to ground when active, 24DC / 100mA sink
• Auto Refreshing Time during Code Entry
a) Each digit max. entry time limit: 10 seconds
b) Each code max. entry time limit: 30 seconds
• Dimensions
117 x 74 x 48mm
• Weight
180g

8. Application Examples

1. Basic wirings of a stand-alone door
lock with inhibit authorization code
and indication (fig. 2)
• Connect the 1N4004 as close as
possible to the lock in parallel with
the lock power terminals in order to
absorb the back EMF and to prevent
it from damaging the keypad. The
1N4004 is not required if the electric
lock is AC-operated.
v2 15/11/2013
10 user codes for output 2 (user number 0-9), auto or manual code entry
10 user codes for output 3 (user number 0-9), auto or manual code entry
HAA85BL
14 VELLEMAN