Velleman HAA85BL Bedienungsanleitung Seite 12

NOTE: * Entering single user command code 8901 is not necessary if the keypad was already in single
user mode.
Cancel a wrong entry with
3. Operating the keypad – Taking the data programmed above and other default features as reference
a. To command output 1, enter one of the user codes in group 1 and validate with
b. To command output 2, enter one of the user codes in group 2 and validate with
c. To command output 3, enter one of the user codes in group 3 and validate with
d. The personal master code is a super user code to command the outputs. This feature allows you to use
only one code to operate several keypads with the same master code but different user codes. Enter
the personal master code and validate with
e. The duress code does not need to be programmed. The keypad automatically determines the duress
code by increasing the first digit of user codes in group 1 with two units. All user codes have duress
code function.
Example:
To command the duress function, enter the duress code(s).
v2 15/11/2013
HAA85BL
Exit programming mode. All above data stored and
ready for use
or wait 10 seconds and retry.
Output 1 activates for 1 second
Output 1 activates for 1 second
Output 1 activates for 1 second
Output 2 starts or stops
Output 2 starts or stops
Output 3 starts or stops
and the corresponding output number.
Output 1 activates for 1 second
Output 2 starts or stops
Output 3 starts or stops
User codes in group 1
8321
11223
33221
Duress output activates (output switches to ground) and output 1
activates for 1 second
Duress output activates (output switches to ground) and output 1
activates for 1 second
12
.
.
.
Corresponding duress codes
0321
31223
53221
VELLEMAN