VOLTCRAFT FB-02 SWD Bedienungsanleitung Seite 41

"MOUNT SD" Setup Menu
In this menu item, the SD memory card is mounted auto-
matically after insertion. The display shows the mes-
sage "SD CARD MOUNTED!" and the memory card
symbol.
Before removal, it always has to be unmounted manually to pre-
vent data loss.
Select the menu item "UNMOUNT SD" and confirm by pressing
"SET" (2). The display shows the message "SD CARD
UNMOUNTED!" and the memory card symbol goes out. The SD
card can be removed.
"DISPLAY" Setup Menu
This menu item sets the contrast, display brightness and display
mode.
"CONTRAST"
"BG LIGHT"
"BLIGHT ON"
"BLIGHT ON"
"BLIGHT OFF"
The contrast can be set ideally for your angle
in the area of 0 to 24.
The display lighting brightness can be set
ideally for your environment in the area of 1
to 5.
This menu item sets the display mode. The
following options are available:
Display lighting always on
Display lighting always off
41