VOLTCRAFT FB-02 SWD Bedienungsanleitung Seite 34

FB-02 SWD
The remote control is connected to the converter with the includ-
ed USB cable.
Plug one end of the connection cable into the socket (1) at the
remote control, and the other into one of the two connection sock-
ets for the LCD remote control of the converter.
The connection cable has a length of 1.8 m. If this is
not sufficient for your application, an optional USB
cable with a length of up to 4m can be used.
FB-03 SWD
The remote control is connected wirelessly to the converter with
the included USB radio stick. The radio receiver is already
installed in the remote control.
The battery must be charged before first use of the
remote
Batteries/Charging the Rechargeable Battery"
Plug the USB radio stick (10) into one of the two connection sock-
ets for the LCD remote control at the converter.
The radio connection is sufficient for a distance
of approx. 25 m at a free line of sight. This range
may, however, be negatively influenced by met-
al covers or interferences.
34
control. See chapter "Replacing