Connection To Several Converters - VOLTCRAFT FB-02 SWD Bedienungsanleitung

Connection to Several Converters

Observe the safety notes as described in chap-
ter "Connection to a Converter"
The remote control can be used to optionally control and read up
to 4 converters in sequence. The parameters are, however, all
stored on the inserted SD card.
Every converter must be assigned a separate address (1 to 4),
because interferences will otherwise result! Assignment is per-
formed right at the converter.
For connection of several converters, additional USB cables
(type A plug -> type A plug) are required. The batteries are not
included in the scope of delivery.
35