Operating The Ulitium - Sundaya Ulitium Lightkit Betriebsanleitung

Pull
Switch
Spool
12
Master
Switch
Cord
Operating the
Ulitium
When the Ulitium is shipped
out of the factory, the
electronic circuitry is not yet
activated.
Press once the Master Switch
at the bottom of the Ulitium to
activate the unit.
(When storing the lamp away
for a long time or during
transportation, do not forget
to deactivate the circuitry by
pressing again the Master
Switch).
The cord length can be
adjusted by pulling out the
Spool inside the Pull Switch,
and then winding or unwinding
the cord.