Connecting The Hub4 - Sundaya Ulitium Lightkit Betriebsanleitung

Connecting the
Hub4
Under the roof, place the Hub4
somewhere between the future
locations of the Ulitium lamps.
Insert the Bayonet Plug of the
cable from the LEC, to one of
the four ports on the Hub4.
Twist clockwise the Bayonet
Plug to lock it in place.
(For 4 Light kits, connect
one Hub4 to another using
the extra cable with Bayonet
Plugs).
OPTIONAL: for longer
distances, you can also
connect two Hub4's with
an optional Sundaya DC
cable, wired to the terminals
underneath each Hub4.
9