Sundaya Ulitium Lightkit Betriebsanleitung Seite 13

Pass other bayonet plug and
rest of the cable through the
hole in the ceiling you just
made.
Slip cable into Celing Cap
provided, through a slit on its
side.
Maintain the Ulitium at desired
height. Then fasten Ceiling
Cap to the ceiling with screws,
covering up the hole on the
ceiling.
Connect the bayonet plug that
has been passed through the
ceiling, to any available ports
on the Hub4.
Repeat the above steps for all
lamps in the kit*.
11
*) for Lightkits 2,3 and 4.