VAPANION REVENGER MINI Bedienungsanleitung Seite 94

VAPANION
REVENGER MINI
2. Setting the temperature: In the TC-Ni/TC-Ti/TC-SS/TCR modes, the wattage can be
adjusted by pressing the Plus and Minus buttons. Press and hold the respective button to
set the desired temperature at a higher speed.
3. Setting the CCT Mode (Customized Curve of Temperature): In the CCT sub-menu, you
determine the power curve of the device for temperature controlled vaping. Here, you can
set the desired temperature for the preheating of the atomizer head in the first seconds.
Press the Plus or Minus button to set the temperature. Press the Fire button to set the
preheat time. When all modifications are finished, press the Mode button to save and exit.
4. Locking / Unlocking the resistance: In the TC-Ni, TC-Ti, TC-SS, and TCR modes, you
can lock or unlock the resistance by simultaneously holding down the Minus and Mode
buttons for two seconds. A lock symbol will appear on the display. Replacing the atomizer
head does not reset the set resistance.
92
OPERATING & CHANGING THE VAPING MODES