VAPANION REVENGER MINI Bedienungsanleitung Seite 81

USING THE DEVICE
Display
After switching on the device, the voltage, resistance value, battery status, temperature and power
output are displayed on the OLED display. If the device is not used for 10 seconds, the Real Time
Clock / the time will be displayed. If the device is not used for an additional 15 minutes, the time
display will also go out. Pressing the Fire button or any of the Touch buttons will reactivate the
screen and make the main interface appear. (Instead of the default 10 seconds, you can choose
your setting from a time interval between 3 seconds and 60 minutes.)
LED Pattern
Press the Mode button three times in quick succession to enter the menu. Press the
adjustment buttons until the „SYSTEM SET" field is highlighted in white. Confirm by pressing
the Mode button once and navigate to the „LIGHT" menu item by pressing the Plus or Minus
button. Confirm by pressing the Mode button once and navigate to the desired one.
Make your selection by pressing the Mode button once.
VAPANION
REVENGER MINI
79