Port Forwarding - Konig Electronic CMP-NWIPCAM22 Anleitung

3. Multi Channel Display Area
If the user adds multi channels (refer to 7.3.2), it will shift to 4-Ch, 9-CH and will automatically show other
devices. On the display area, if the image is chosen, you can play, stop, record, control Pan/Tilt and perform
other operations.
These buttons stand for start video, stop, monitor, talk, record and snapshot.
Click a button to choose a function.
4. PTZ and Video Control
In the Pan/Tilt control area, the user can control the position according to the arrow sign: up, down, left, right,
middle, horizontal cruise, vertical cruise, stop, etc.
stands for open IO output and closed IO output.
The user can also set the device frame rate, resolution, brightness, contrast and other parameters.
Visiting the IP Camera from WAN

Port forwarding

To view the camera over the Internet, you need to forward a port in your router to the IP of the camera. To
open a port in your router and make the camera accessible over the internet, read the part in the manual of
your router that contains "port forwarding". Figure 9 is an example.
Figure 9
6