Märklin 66470 Bedienungsanleitung Seite 12

one transformer is still plugged into a household current
outlet, a dangerous alternating current will be present in
the bare metal parts of the power cords plugs for the other
transformers.
Always observe the following:
The power cords for several transformers should therefore
always be plugged into a common power distribution
strip. The transformers must always be connected to or
disconnected from the household current by plugging or
unplugging the power cord for the distribution strip!
• Electrical power consumers (examples: feeder con-
nections, turnouts, signals, lights, etc.) must never be
connected to two or more transformers at the same time,
because this situation will create the dangerous alterna-
ting current described above.
12
Important:
Two or more solenoid accessories connected together to
a switch or to a circuit track must not receive their power
from different transformers.
• Never touch any bare metal parts on a layout, before
the entire layout is completely without power, i. e. all
transformers must be disconnected from the household
current.
• A locomotive must never be stopped continuously over
the separation point between two track power circuits in
conventional operation with alternating current transfor-
mers!