Hama 00062758 Bedienungsanleitung Seite 5

Installing the software under Windows® XP with Service Pack 2:
1. Start your computer and log on to Windows® XP as an administrator or as a user with administrator
privileges.
2. Save all open documents and close all running programs before you start installing the software.
Also check if the required DirectX version 9.0c or higher is already installed on your system.
(See the manual or online help of your operating system for instructions on how to fi nd out what version
is installed.)
3. Insert the enclosed driver CD in your CD-ROM drive. The Hama Installation Manager now starts
automatically. Select the required language.
4. A new menu is displayed with various options, please select the Install driver option.
5. Driver installation starts. Please follow the instructions of the installation program. The program then
copies the required driver fi les to your system.
6. In the next step, you will install the DVB-T Hybrid receiver software. Select the Install software option
to do this.
7. Please have your CD key found on the CD cover ready during installation. Caution: Please make
sure to keep the CD cover with the CD key at a safe place as you will need it for each reinstallation of
the software.
8. Now follow the instructions of the installation program until the installation is completed
successfully.
9. Plug the Hama DVB-T Hybrid receiver into your laptop/notebook computer. The Windows® Hardware
Wizard is launched and installs the driver copied in the previous step.
Toggle between analogue and digital mode:
Before searching for channels, make sure that the aeriaL is connected to the Hama DVB-T receiver and the
card is plugged into the computer.
CardBus-Slot
Antenna Input
Composite Video In
S-Video In
You are prompted for the mode you would like to use.
You can choose between digital (DVB-T) and analogue
(conventional) reception
8
Audio In
5V 1000mA
You can also toggle the supported modes from the user menu. Click
the icon and select the required type.
Note: FM radio is not supported, which is why you
cannot select this option.
Channel search (analogue mode):
Before searching for channels, make sure that the aerial is connected to the Hama DVB-T receiver and the
card is plugged into the computer.
1. Click the confi guration menu and select the Device section.
2. Select your device from the list.
3. Select the Channel section in the Settings
menu and choose a Region, e. g. Germany.
Click the Search button to search for channels.
4. Click OK to close the window.
9