Hama ML-18 Bedienungsanleitung Seite 4

Warning:
- Do not connect terminal devices to the ML-19 Mobile Charger Station while it is being charged.
- Charge the ML-18 Mobile Charger Station fully before using it for the fi rst time.
Charging Terminal Devices
- Find the correct adapter for your terminal device and connect it to the connecting cable. The other end of the
connecting cable must be connected to the DC Out socket.
- Press the ON/OFF button for approx. 3-5 seconds until the LEDs light up.
- The ML-18 Mobile Charger Station is now ready for use and your terminal device can be connected for
charging.
- Please note that the ML-18 Mobile Charger Station switches off automatically if no terminal device is
connected for charging within approx. 10 seconds. If this happens, you can switch the device on again by
pressing the ON/OFF button for approx. 3-5 seconds.
- You can unplug the connecting cable when your terminal device is fully charged.
- The ML-18 Mobile Charger Station switches itself off automatically after approx. 10 seconds or when you
press the ON/OFF button.
Warning:
When charging terminal devices such as mobile phones, MP3 players etc., the ML-18 Mobile Charger Station may
not be connected to the charger.
Checking the charge status of the ML-18 Charger Station
Do not connect any cables to the ML-18 Mobile Charger Station.
Press the ON/OFF button for approx. 3-5
seconds and the LEDs show the charge status.
4