Herunterladen Inhalt Inhalt Diese Seite drucken

Overheating Protection; Maintenance And Cleaning; Technical Data - Conrad 46 96 89 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

3. Before turning off the product, turn the right control knob to MIN.
4. Turn off the product and disconnect it from the power supply for extended periods of disuse.

Overheating protection

• The product has overheating protection that automatically deactivates the heater should the
air vents become blocked or should the product fall over.
• Once the temperature falls to +55 °C (this can take up to approx. 5 minutes), the heater will
be automatically reactivated.
• To prevent the overheating protection from being unnecessarily reactivated, take the
following steps:
- Remove the object that may have triggered the overheating protection.
- Make sure the product cannot accidentally tip over.
If the problem occurs again, contact technical support or another professional.

Maintenance and cleaning

• The product is maintenance-free apart from occasional cleaning.
• Before cleaning, disconnect the product from the power supply and wait until it has cooled
down entirely.
• Never submerge the product in water.
• Clean the housing with a slightly damp, lint-free cloth. Do not use any aggressive cleaning
agents.
• Remove any dust from the safety guard with a vacuum cleaner or a brush.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household
waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.

Technical data

Operating voltage ......................220 – 240 V/AC, 50 Hz
Power consumption ...................30 W (fan)
...................................................1500 W (at half heating power)
...................................................3000 W (at full heating power)
Protection type ...........................IPX4
Protection class .........................I
Suited for spaces of up to ..........approx. 40 m
Cable length ..............................1.4 m
Dimensions (W x H x D) ............330 x 400 x 315 mm
Weight .......................................approx. 7 kg
2
These operating instructions are published by Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
© Copyright 2013 by Conrad Electronic SE.
V1_0613_02-ETS-Mkde

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis